The Elite is a 100mm dimmable LED downlight 10W for860lm at 5000K, on a 60 beam, in black-and-nickel orwhite.

Genuinely dimmable, which not all downlights are

Plenty of LED downlights are fixed output. The Elite dims, so one circuit can be bright for cleaningand low for an evening. Check dimmer compatibility with us before you buy thatis where dimming problems come from, not from the fitting.

A 60 beam is the general-purpose angle

Wider than a 40 accent light, narrower than a 120 wash. At 60 a run of Elites giveseven ceiling-to-floor coverage without scalloping, which is what you want for kitchens,hallways and living areas. Space them roughly to the ceiling height for an even result.

5000K is cool white choose deliberately

This version is 5000K: crisp and bright, right for kitchens, laundries,garages and task areas. In a bedroom or lounge it will feel clinical. If you want warm light in thesame fitting, ask us what else the Elite range offers.

90mm cut-out

A 90mm hole for a 100mm fitting the most commondownlight cut-out in Australian ceilings. If you are replacing existing downlights, measure the holefirst: a 90mm cut-out will not cover a larger existing one.

Black and nickel, or white

White disappears into a white ceiling. Black with a nickel trim is a deliberatemark it reads as architectural, and it suits a dark or timber-lined ceiling where white wouldstand out.

Where it works

• Kitchens, laundries and utility areas.
• Hallways and living areas, in a run.
• Garages and workshops.
• Timber or dark ceilings, in black and nickel.

Specifying it

100mm, 90mm cut-out, recessed. 10W LED giving860lm at 5000K, beam 60, CRI >84,dimmable. 240V.

No warranty term is recorded in any of our sources for this downlight.Ask us before ordering and we will confirm it on a fitting installed in aceiling, the warranty is worth knowing in advance. Supplied and supported by Lights For You.

Questions

Will it work with my dimmer?

It is a dimmable fitting, but compatibility depends on the dimmer. Check with us before ordering that is where dimming problems come from.

What size hole does it need?

A 90mm cut-out. If you are replacing existing downlights, measure first a 90mm cut-out will not cover a larger hole.

Is 5000K right for a living room?

Probably not it is crisp and bright, suited to kitchens, laundries and task areas. In a lounge or bedroom it feels clinical.

How far apart should they go?

Roughly the ceiling height. A 60 beam gives even coverage without scalloping at that spacing.

What is the difference between the two finishes?

White disappears into a white ceiling; black with nickel trim is a deliberate architectural mark, good on dark or timber-lined ceilings.

How bright is it?

860lm from 10W, with CRI above 84.

What is the warranty?

No warranty term is recorded in any of our sources. Ask us and we will confirm before you order.