The Elia 90 is a white downlight frame frame only, into a76mm cut-out. It contains no light source.

There is no LED in this product. It is the trim; the lightcomes from a compatible module bought separately.Tell us what you are lighting and we will match one wattage, colour temperatureand beam angle come from that choice, not from this frame.

This one is IP20 NOT for bathrooms. Unlike the601 and 703 frames in the same range, which are IP44, the Elia hasno splash protection. It is for dry rooms only. If it is going in a bathroom, laundryor anywhere near water, ask us for one of the IP44 frames instead.

Flush and clean-lined

The Elia is the plainest of the frames a simple white trim with no gimble,no adjustment and no visible detail, giving aneat flush finish against a white ceiling. Where the 703 tilts and the 601 comes innickel, this one is designed to disappear entirely. In a room with a dozen downlightsthat is often exactly what you want.

Featherweight

0.01kg ten grams, in aluminium. It puts no load on a ceiling at all.

Why buy a frame separately

You choose the module, and can change it later for a different wattage or colourwithout touching the ceiling. And when a module eventually fails, you swap the module ratherthan cutting an integrated downlight out of the plasterboard which on a ceiling withtwelve of them is the difference between an afternoon and a repaint.

A 76mm cut-out

61.5mm deep into a 76mm hole. Note that this isnot the common 90mm Australian cut-out, and it is also different from the601s 70mm and the 703s 90mm the three frames in this range all takedifferent holes. Confirm the cut-out before anyone drills.

Warranty is three years. Our datasheet says five and the recordsays three. We publish the shorter and the same five-year sheet figure appearson every downlight frame in this range without support from any other source, so it is worth settlingonce with Telbix.

Where it works

• Dry rooms living areas, bedrooms, hallways.
• White ceilings, where the trim should disappear.
• Installations where modules will be upgraded later.
• Not bathrooms or laundries ask us for an IP44 frame.

Specifying it

76mm cut-out, 61.5mm deep, 0.01kg, in aluminium, white.No LED module included sold separately.IP20 dry rooms only, NOT bathrooms. Installation by a licensed electrician.Warranty published as three years the sheet says five; ask us.

Supplied and supported by Lights For You.

Questions

Does it come with an LED?

No it is the trim only. The light comes from a compatible module bought separately. Tell us what you are lighting and we will match one.

Can it go in a bathroom?

No. This frame is IP20 with no splash protection, unlike the 601 and 703 frames in the same range, which are IP44. Ask us for one of those instead.

What size hole does it need?

76mm, 61.5mm deep. Note that the three frames in this range all take different cut-outs 70mm, 76mm and 90mm. Confirm before anyone drills.

How is it different from the other frames?

It is the plainest no gimble, no adjustment, no visible detail. Where the 703 tilts and the 601 comes in nickel, this one is designed to disappear entirely.

Why buy a frame and module separately?

You choose the module and can change it later without touching the ceiling. When one fails you swap the module rather than cutting an integrated downlight out of the plasterboard.

How heavy is it?

Ten grams. It puts no load on a ceiling at all.

What is the warranty?

We publish three years. The datasheet says five, unsupported by any other source the same pattern appears on every frame in this range. Ask us and we will settle it.