Your shopping cart is empty!
The Mazal WB is a 420mm cast gypsum wall light in terracotta, black, grey orwhite two E14 globes to 25W each, not supplied, projecting75mm.
It is cast from gypsum and our record did not say so.The material field was empty, on a fitting where the material is the entire idea.
Gypsum is plaster, cast in a mould rather than pressed or machined, and that hasconsequences nothing else in this catalogue shares:
Thinking of painting it to match your wall exactly? Gypsumfittings are often specified for that reason. Ask us first we will confirmwith Telbix whether the finish is intended to be overpainted, becausedoing so is unlikely to be covered by the warranty if it is not.
Two E14 to 25W each 50W total, not supplied.E14 is the small screw base, SES a candle or golf-ball globe.
Every one of our sources said this fitting does notdim. The datasheet, our record and the old page all said No.
That cannot be right. The Mazal is a plaster body holdingtwo ordinary E14 lamp holders. There is no driver, no electronics and nothingbetween the globe and the mains so whether it dims dependsentirely on the globes you fit, exactly as it does on every other E14 fitting in thiscatalogue. Fit two dimmable LEDs and use a wall dimmer.
And on this fitting it is worth doing. An up-and-down wall light throwstwo soft triangles of light on the wall, and on aplaster surface, dimmed low, that is a genuinely beautiful effect the plasterpicks up the grazing light and shows its own texture. Buy the two globes together, samebrand, and let us match them to your dimmer.
Because the globes sit inside the body, brightness and warmth are the onlydecisions. Use warm 2700K againstterracotta especially, cool white kills the warmth entirely.
A tall slim vertical with a very shallow projection. At75mm the Mazal is among the flattest wall lights in this catalogue theBrevan projects 140mm, the Virell 170, the Pedral 280 so it works inhallways, stairwells and narrow passages where a deeper fitting is something youbrush against.
At 1.6kg it is heavier than it looks, because plaster isdense: more than the 0.36kg Mosari and twice the 0.8kg Brevan. It still fixes toplasterboard, but use a proper anchor rather than a plug, and tell your electricianthe figure.
Gypsum and moisture do not mix. It isIP20 indoor and dry locations only, and unlike a metal fitting the materialitself is porous: a bathroom or a steamy laundry is not just outside its rating, itis bad for the plaster. Keep it dry, and dust it with a soft drybrush rather than a damp cloth. ClassI earth required,hard-wired.
140mm wide by 420mm high, projection75mm, 1.6kg, in cast GYPSUM, interracotta, black, grey or white. TwoE14 (SES) globes to 25W each 50W total,NOT supplied; dimming is globe dependent, whatever our records said.240V, ClassI earth required,IP20 indoor and dry locations only, and the plaster is porous. Warranty isthree years, as a replacement warranty.
Supplied and supported by Lights For You.
What is gypsum, and why does it matter?
It is plaster, cast in a mould. That gives it the same matt, slightly chalky surface as a painted plasterboard wall, so the fitting merges into the plane where a metal one sits proud of it. It has no sheen, so it never catches a highlight from another light in the room, and its cast edges are soft rather than crisp which is what gives it its Mediterranean, hand-made character. Our record carried no material at all.
Can I dim it?
Yes, with dimmable globes despite every one of our sources saying No. The Mazal is a plaster body holding two ordinary E14 holders, with no driver and nothing between the globe and the mains, so dimming depends entirely on the globes. It is worth doing: an up-and-down light throws two soft triangles onto the wall, and dimmed low against plaster the grazing light shows the materials own texture.
Can I paint it to match my wall?
Gypsum fittings are often specified for exactly that. Ask us first we will confirm with Telbix whether the finish is intended to be overpainted, because doing so is unlikely to be covered by the warranty if it is not.
What globes do I need?
Two E14 the small screw base, SES to 25W each, 50W total, not supplied. Use warm 2700K; against terracotta especially, cool white kills the warmth entirely. Buy the two together, same brand, if you intend to dim them.
Can it go in a bathroom?
No. It is IP20, indoor and dry only and unlike a metal fitting the material itself is porous, so a bathroom or steamy laundry is not just outside its rating, it is bad for the plaster. Dust it with a soft dry brush rather than a damp cloth.
How far does it stick out?
75mm among the flattest wall lights in this catalogue, where the Brevan projects 140mm, the Virell 170 and the Pedral 280. That makes it usable in a hallway, stairwell or narrow passage where a deeper fitting is something you brush against.
Which colour should I choose?
White becomes almost invisible on a white wall until it is lit, which is the most interesting way to use it. Grey reads as a shadow on a light wall. Terracotta suits Mediterranean and earthy palettes limewash, clay plaster, natural timber. Black is the opposite decision: a deliberate graphic mark on a pale wall.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.