The Miro EX1 is a 110mm square exterior wall light in black or grey sand one GU10 globe to 6W, not supplied IP65, in polycarbonate.

Black or grey not white. Our page offeredblack, grey, and white. On this single-light version we stockblack and grey. If white is what you want,ask us before ordering rather than choosing a finish that is not there.

IP65 and polycarbonate a genuine coastal fitting

IP65 is dust-tight and rated against water jets from any direction a realexterior rating, not a sheltered one, so it can go on anexposed wall that takes wind-driven rain. Most wall lights in this range sit atIP44 or IP43 and cannot.

The polycarbonate body is the other half of it, and it is not a cost compromise.Near the coast, the thing that kills exterior lights is not water, it is salt corrodingmetal aluminium pits, fixings seize, and the fitting fails from the outside in.Polycarbonate does not corrode at all. The claim that the Miro withstands coastalconditions is one of the few in this catalogue that the construction actually supports.

110mm square, 85mm deep, 250 grams

It is small a 110mm square face standing85mm off the wall at 0.25kg. That makes it amarker and a wash: a light on a path, at a gate, beside a door or repeated along afence line, and light enough that fixing it into rendered brick or fibre cement is straightforward.

The globe is yours to choose and that is worth something

Most exterior fittings in this range have a sealed integrated LED: when the diodefails, the fitting is finished. The Miro takes a standard GU10, soyou pick the output and colour and you can replace it in ten years.

Buy a GU10 rated for enclosed fittings. An IP65 body issealed, and heat with nowhere to go is what kills LED globes. Many GU10 LEDs arerated for open fittings only and it is printed on the box. Ask us and we will matchone and tell us the colour temperature you want, because with a replaceable globethat is entirely your choice.

On dimming. Our record says notdimmable. In practice a fitting that only holds a GU10 will dim ifthe globe and the dimmer both do the fitting itself has nothing in it toprevent it. If dimming matters outside, tell us and we will confirm the combinationrather than leaving you to find out.

Class II double insulated

No earth required, which simplifies the wiring, though it is still hard-wired anda licensed electrician installs it. There is also an up-down version of the Miro ifyou want light thrown both ways from the same body.

Where it works

• Exposed walls, gates and fence lines IP65 handles the weather.
• Coastal sites, where polycarbonate beats metal.
• Repeated along a path or a boundary.
• Buy a GU10 rated for ENCLOSED fittings.
• White is not stocked on this version ask us.

Specifying it

110mm wide by 110mm high, projection85mm, 0.25kg, in polycarbonate, sandfinish. One GU10 globe to 6W, NOT supplied andreplaceable. 240V,ClassII double insulated, no earth required,IP65 dust-tight and jet-rated; suitable for exposed positions. Warranty isthree years, as a replacement warranty.

Supplied and supported by Lights For You.

Questions

Does it come in white?

Not this single-light version we stock black and grey. Our page offered black, grey, and white. Ask us before ordering if white is what you want.

Can it go on an exposed wall?

Yes. IP65 is dust-tight and rated against water jets from any direction a real exterior rating, not a sheltered one. Most wall lights in this range sit at IP44 or IP43 and cannot.

Is polycarbonate a compromise?

Not near the coast. What kills exterior lights there is salt corroding metal aluminium pits and fixings seize. Polycarbonate does not corrode at all, so the coastal claim is one of the few here the construction actually supports.

Is a globe included?

No one GU10 to 6W, your choice, and replaceable. That is an advantage: most exterior fittings in this range have a sealed integrated LED, and when the diode fails the fitting is finished.

What globe should I buy?

A GU10 rated for enclosed fittings. An IP65 body is sealed and heat with nowhere to go kills LED globes many GU10s are rated for open fittings only, printed on the box. Tell us the colour temperature you want and we will match one.

Can I dim it?

Our record says no, but a fitting that only holds a GU10 has nothing in it to prevent dimming it comes down to the globe and the dimmer. Tell us if dimming matters outside and we will confirm the combination.

How big is it?

A 110mm square face standing 85mm off the wall, at 250 grams small enough to fix into rendered brick or fibre cement without special provision.