The Chaska is a 350mm up-and-down wall light two integrated LEDs,8W, 490lm at 3000K in black, copper, gold or silver.

Do not specify this for a bathroom until we confirm it. Anearlier version of this page claimed an IP44 rating and called it ideal for bathrooms while itsown specification, printed lower on the same page, said IP20. Our record says IP20 aswell. We publish IP20: indoor, dry locations only. If you need it in a bathroom,ask us and we will get the rating confirmed in writing first.

Up and down from a slim body

90mm wide, 350mm tall, 100mm projection, on a60mm backplate. Two LEDs fire in opposite directions, so you getone column of light up the wall and one down the architectural effect, whichgrazes the surface and shows its texture rather than lighting the room.

The backplate is smaller than the fitting

A detail worth having: the 60mm backplate sits behind a 90mm body, sothe light appears to float slightly off the wall rather than sit flat against it. On arun down a hallway that shadow line is what stops four identical fittings looking like a row ofboxes.

Four finishes, and two of them are uncommon

• Copper warm and pink, rare on a wall light.
• Gold the classic warm metal.
• Silver cool and neutral, softer than chrome.
• Black graphic, disappears by day.

All in a smooth matt texture.

3000K only, and it does not dim

No colour selection, no dimmer: warm white at one level. That is a simplerproposition than most of this range, and on a corridor or a stair it is all you need. But if you want tochange the mood, this is not the fitting.

The LED is built in

8W integrated and included, so nothing to buy and nothing to match across arun of them. Backed by a three-year replacement warranty.

Where it works

• Hallways and stairwells, in a run.
• Either side of a bed or a doorway.
• Textured walls, where the grazing shows.
• Not bathrooms ask us first.

Specifying it

90mm wide, 350mm high, 100mm projection, backplate60mm, 1.2kg, in aluminium and iron, matt. Two integrated LEDs totalling8W and 490lm at 3000K, included,CRI>80. Not dimmable. 240V,ClassI earth required,published as IP20 indoor and dry locations only. Warranty is three years, as areplacement warranty.

Supplied and supported by Lights For You.

Questions

Can I put it in a bathroom?

Not on our advice. An earlier version of this page claimed IP44 and recommended bathrooms, while its own specification and our record both said IP20. We publish IP20 ask us and we will get the rating confirmed in writing before you commit.

What does up-and-down do?

Two LEDs fire in opposite directions, putting one column of light up the wall and one down. It grazes the surface and shows its texture rather than lighting the room.

Why is the backplate smaller than the light?

A 60mm backplate behind a 90mm body makes the fitting appear to float slightly off the wall. On a run down a hallway that shadow line stops four identical fittings looking like a row of boxes.

Can I change the colour temperature?

No 3000K warm white only, at one level. It is a simpler proposition than most of this range.

Can I dim it?

No.

Do I need globes?

No. The LED is integrated and included, so nothing to buy and nothing to match across a run.

What finishes are there?

Four black, copper, gold and silver, all in a smooth matt texture. Copper is the rare one on a wall light.