Welcome To our shop !

Domus Maxi Curve 1.7m Long Pendant White Dimmable 4k

$150 $374
SKU: KO80391096018
Availability: in Stock

The Domus Maxi Curve is a 1.7m suspended LED linear pendant 34W, 3400lm, 4000K atCRI90, dimmable, in a white body, in six finishes. Made to order, and no lead time…

Qty:

The Domus Maxi Curve is a 1.7m suspended LED linear pendant 34W, 3400lm, 4000K atCRI90, dimmable, in a white body, in six finishes.

Made to order, and no lead time is published

Domus asks you to call and confirm it. We will.

What an installer needs for a curved fitting that a straight one does not
Same as any pendant Extra, because it curves
34W at 240V The orientation which way the arc faces
3m drop, shortened on site Point positions as coordinates, not one dimension
Dimmable confirm the dimmer The chord, so it can be checked against the space
No lamp integrated LED A note that off-level reads as a twist
  • The orientation is the one that costs time. An arc installed the wrong wayround is not subtly wrong it is mirrored, and on a fitting with two fixedsuspension points it cannot be turned after the ceiling is closed. Put it on the drawingexplicitly.
  • The coordinates matter because the two points are offset in both directions an installer measuring one dimension from a wall has no way to place the secondpoint.
  • And neither the point spacing nor the radius is published, so both have tocome from us before the ceiling is set out.
  • Everything electrical is straightforward 34W, 240V,metres 20 for the load, and the geometry does not touch any of it.
And one line worth adding to the handover sheet

There is no lamp. This is an integrated LED, so when it fails the fitting isreplaced and on a curved fitting a replacement must match not only the finish butthe geometry, so a spare from the same batch is worth more here than on a straightrun. The 3-year warranty is replacement type, which is the right cover.

The published specification
Specification Value
Light output 3400lm 100lm/W
Colour rendering CRI90 at 4000K
Power 34W at 240V load = metres 20
Beam 120, down only
IP rating IP20 dry interior only
Suspension drop 3m supplied
Warranty 3 years, replacement
Orientation point coordinates chord radius Not published ask us before setting out
Where it works
  • Reception desks and breakout areas where curved furniture exists.
  • Consulting rooms and study spaces at 4000K.
  • White and plasterboard ceilings.
  • Not installed without the orientation on the drawing.
  • Not anywhere damp IP20.
Specifying it

1.7m suspended LED linear pendant. 3400lm, 34W (100lm/W), 4000K,CRI90. 120 down-only. IP20. 3m drop. PLEX-COB-20W strip, integral dimmable driver, DALI andemergency on request. White powder-coated aluminium body. Six finishes. 3-year replacement warranty. Ordercode MAXI-CURVE-1.7M-W-4K. A CURVED FITTING NEEDS FOUR THINGS A STRAIGHT ONE DOES NOT the orientation, the point positionsas coordinates, the chord, and a note that off-level reads as a twist. THE ORIENTATION COSTS THE MOSTTIME: an arc installed the wrong way round is mirrored, not subtly wrong, and cannot be turned once theceiling is closed. Put it on the drawing explicitly.

Supplied and supported by Lights For You.

Questions

What does an installer need that a straight pendant does not?

Four things. The orientation which way the arc faces. The suspension-point positions as coordinates rather than one dimension, because the two points are offset in both directions. The chord, so the fitting can be checked against the space. And a note that off-level reads as a twist rather than a tilt, which the eye catches faster.

Which of those costs the most time?

The orientation. An arc installed the wrong way round is not subtly wrong it is mirrored, and on a fitting with two fixed suspension points it cannot be turned after the ceiling is closed. Putting it on the drawing explicitly is a five-second addition that avoids a genuinely expensive mistake.

Why do the points need coordinates?

Because on an arc they are offset from each other in both directions, not just along a line. An installer measuring one dimension from a wall has no way to place the second point. Neither the point spacing nor the radius is published on any listing, so both have to come from us before the ceiling is set out.

Is anything about it straightforward?

Everything electrical. 34W at 240V, load calculated as metres times 20, an integral dimmable driver, and a 3m suspension drop shortened on site none of that is affected by the geometry. So the electrical design and the circuit work can proceed while the geometry is being confirmed, which means the job is not blocked.

What should go on the handover sheet?

That there is no lamp this is an integrated LED, so when it fails the fitting is replaced. And on a curved fitting a replacement has to match not only the finish but the geometry, which makes a spare from the same batch worth more here than on a straight run. The 3-year warranty is replacement type, which is the right cover for a product with no serviceable lamp.

How much light does it give?

3400 lumens at 2000 lumens per metre, or 100 lumens per watt from 34W, at 4000K and CRI90. The 3000K version publishes 3060 lumens for the same power. Neither figure is affected by the geometry question.

Can I use it in a damp space?

No IP20, dry interior only. For bathrooms, covered outdoor areas, commercial kitchens or unsealed bays, ask us about the Domus IMPACT range at IP66 and IK10.

Only logged in customers who have purchased this product may leave a review.

Shipping policy for our store

We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.

  • Fast shipping within 1-3 business days
  • Free shipping on orders over $40
  • 30 days money back guarantee
  • 24/7 online customer support
  • Secure packaging & safe delivery

Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.