Welcome To our shop !

Domus KEY MR11 3W 12V DC 38 Non-Dim

$8 $10
SKU: KO80391096065
Availability: in Stock

The Domus KEY is a 3W MR11 LED globe 12VDC, 38 beam, 240lm, IP54, in6000K. Not dimmable. It is an MR11. Its record says MR16 and they do not interchangeThe…

Qty:

The Domus KEY is a 3W MR11 LED globe 12VDC, 38 beam, 240lm, IP54, in6000K. Not dimmable.

It is an MR11. Its record says MR16 and they do not interchange
  • The title, the model and the datasheet all say MR11. The lamp-type fieldsays MR16.
  • These are different lamps. An MR11 is about 35mm across; an MR16 isabout 50mm. An MR11 rattles in an MR16 fitting and an MR16 will not go into an MR11one.
  • So this is a defect that ends in a returned part, which is why we are stating itplainly rather than quietly publishing the right value.
  • To be clear: this globe is an MR11. If your fitting takes MR16, this isnot the lamp tell us and we will send the right one.
  • We measured the whole catalogue. Exactly 3 listings of 843 record a lampbase that contradicts their own title this one, a pendant titled with E27base recording E14, and a postlight titled B22 recording E27. All three end in the sameplace: the wrong lamp.
This lamp pair has two datasheets, and they disagree
This listing (6000K) 65016 (3000K)
Sheet item table 65016, 65017 65016, 65017 the same pair
Output 240lm 300lm
Warranty None recorded 3 Years
Diameter Not recorded 35mm
  • Both sheets name both SKUs, so this is one lamp pair described twice and they differ on output by 25%.
  • We cannot tell which figure is right, and we are not going to average them. Assume 240300lm, and ask us if the number decides your design.
  • The sibling settles the size question, though. 35mm is the MR11dimension which confirms that the MR16 recorded on this listing iswrong.
  • And a warranty exists. The 3000K version of this same lamp pairrecords 3 years; this one records none. Ask us to confirm the term applies to whicheverversion you order rather than reading the absence as meaning there is no cover.
It needs a driver, and no field says so
  • 12V DC. The datasheet is explicit: a 12V DC constant-voltage LEDdriver is required. No product field carries that.
  • This will not work on mains, and it will not work on an old halogen transformer. A magnetic or electronic transformer built for halogen puts out AC and expects a much largerload at 3W this lamp is far below the minimum most of them need to regulate.
  • What you need is a constant-VOLTAGE 12V DC driver, sized above your totallamp load. Not a constant-current one the two are not interchangeable and thedistinction is easy to miss.
  • Tell us how many you are running and we will size the driver with you. Itis the commonest way a low-voltage LED installation goes wrong.
A 38 beam at 3 W is a specific tool
  • 240lm at 38. Narrow enough to place light deliberately, small enoughto disappear.
  • Which is what an MR11 is for: display cases, joinery, shelving, step and plinthlighting, and anywhere a 50mm MR16 would be too big to hide.
  • 38 is a flood by MR11 standards but a spot by room standards. At 1m it lightsa pool roughly 0.7m across aim it, do not expect it to fill a space.
  • 240lm is modest. Plan on several, which is also why thedriver sizing matters.
6000 K is cooler than most interiors want
  • This variant is 6000K the datasheet lists a 3000Kversion too.
  • 6000K is a cold, blue-white light. It suits display of cool-tonedgoods, technical and inspection work, and marine or signage use it does not suitjoinery, timber, food or anywhere domestic, where it makes warm materials look grey.
  • If this is going into cabinetry or a home, ask us for the 3000K version. Same fitting, same beam, and a completely different result.
  • CRI 80, 35,000hrs, not dimmable.
IP54 on a lamp recorded as indoor

The record says Indoor; the sheet says IP54 protected against dust and splashing water. That is a genuinely useful rating on a smalllamp, and it means this can go somewhere a bare MR11 could not: a covered step, a planter, a dampcabinet. The driver still has to be sited dry.

Where it works
  • Display cases and shelving, where a 50mm lamp will not hide.
  • Joinery and plinth lighting in 3000K, not this 6000K.
  • Step and threshold lighting IP54 helps.
  • Not without a 12V DC constant-voltage driver.
  • Not on an old halogen transformer, and not on a dimmer.
Specifying it

3W MR11 LED globe. 12V DC. 240lm. 38 beam. 6000K. CRI 80. IP54.35,000hrs. Not dimmable. THIS IS AN MR11 its record says MR16, and the two do not interchange (35mm against50mm). It requires a 12V DC CONSTANT-VOLTAGE driver, named on the datasheet and in no field it will not run on mains or on a halogen transformer. 6000K is a cold white; a 3000K versionexists. THIS LAMP PAIR HAS TWO DATASHEETS THAT DISAGREE 240lm here against 300lm on the3000K listing. Assume 240300lm. No warranty recorded here, though the 3000Kversion records 3 years ask us.

Supplied and supported by Lights For You.

Questions

Is it an MR11 or an MR16?

An MR11 the title, the model and the datasheet all say so. The lamp-type field says MR16, and that is wrong. It matters because they are different lamps: an MR11 is about 35mm across and an MR16 about 50mm, so an MR11 rattles in an MR16 fitting and an MR16 will not go into an MR11 one. This is a defect that ends in a returned part, which is why we are stating it rather than quietly publishing the right value. If your fitting takes MR16, tell us and we will send the right lamp.

What driver do I need?

A 12V DC constant-VOLTAGE LED driver, sized above your total lamp load the datasheet requires it and no product field mentions it. Two things it will not run on: mains, obviously, and an old halogen transformer, because those put out AC and expect a much larger load than a 3W lamp can provide. Also make sure it is constant-voltage rather than constant-current; the two are not interchangeable and the distinction is easy to miss. Tell us how many you are running and we will size it with you this is the commonest way a low-voltage LED installation goes wrong.

Is 6000K right for my project?

Probably not, if it is domestic or joinery. 6000K is a cold, blue-white light: it suits display of cool-toned goods, technical and inspection work, and marine or signage use, but it makes timber, food and warm materials look grey. The datasheet lists a 3000K version of the same lamp same beam, same output, completely different result. If this is going into cabinetry or a home, ask us for that one.

How much light does it give?

Between 240 and 300 lumens, and we would rather give you the range than a false precision. This lamp pair has two listings and two datasheets that each name both SKUs one pair described twice and they disagree by 25%: this one says 240lm and the 3000K listing says 300lm. We cannot tell which is right and we will not average them. Either way it is modest by design: an MR11 is a placement tool rather than a room light. At one metre the 38 beam lights a pool roughly 0.7m across, so aim it at something and plan on several which is also why sizing the driver correctly matters.

Why choose MR11 over MR16?

Size. An MR11 is about 35mm across against an MR16’s 50mm, so it hides where the larger lamp cannot display cases, shelving, joinery, plinths and step lighting. You give up output: 240 lumens here against several hundred from a typical MR16. If the fitting can take an MR16 and you need the light, that is the better lamp; if the constraint is the aperture, this is the one.

Can it go somewhere damp?

It is rated IP54 protected against dust and splashing water which is genuinely useful on a lamp this small and means it can go somewhere a bare MR11 could not: a covered step, a planter, a damp cabinet. The record says “Indoor”, but that field holds “Indoor” on 340 of 342 Domus records and carries no information; read the IP rating instead. The driver still has to be sited dry.

Can I dim it?

No it is explicitly non-dimmable, which is worth checking before you design a scheme around it. On a low-voltage run the dimming would have to happen at the driver in any case, and this lamp is not built for it. If you need dimmable low-voltage accent lighting, tell us what you are doing and we will suggest a lamp and driver combination that works together.

Only logged in customers who have purchased this product may leave a review.

Shipping policy for our store

We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.

  • Fast shipping within 1-3 business days
  • Free shipping on orders over $40
  • 30 days money back guarantee
  • 24/7 online customer support
  • Secure packaging & safe delivery

Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.