Your shopping cart is empty!
The Domus Maxi 50 is a 2.4m suspended LED linear pendant 48W, 4800lm, 4000K atCRI90, dimmable, in an aluminium body, in six finishes.
Domus asks you to call and confirm it. We will.
| Specification | Value |
|---|---|
| Light output | 4800lm 100lm/W |
| Colour rendering | CRI90 at 4000K |
| Power / length | 48W at 240V 2400mm |
| Beam | 120, down only |
| IP rating | IP20 dry interior only |
| Suspension | 3m drop two points per fitting |
| Dimming | DALI and emergency on request |
| Warranty | 3 years, replacement |
| Joiners lifespan spacing weight | Not offered / not published |
2.4m suspended LED linear pendant. 4800lm, 48W (100lm/W), 4000K,CRI90. IP20. 2400mm. 3m drop. PLEX-COB-20W strip, integral dimmable driver, DALI and emergencyon request. Anodised aluminium body. Six finishes. 3-year replacement warranty. Order codeMAXI-50-2.4M-A-4K. THESE DO NOT JOIN INTO A CONTINUOUS LINE. A discrete pendant at a fixed length with its ownsuspension and supply nothing in the range is a joiner, coupler or continuous-run kit. A specificationcalling for a continuous 7.2m run cannot be met by three of these. For a continuous line, ask about theDomus MAX profile range and note that MAX-50 is NOT the Maxi 50.
Supplied and supported by Lights For You.
Can I join several into a continuous line?
No. This is a discrete pendant rather than a jointable profile system sold as a complete fitting at a fixed length with its own suspension and supply and nothing in the range is described as a joiner, an end feed, a coupler or a continuous-run kit. A specification calling for a continuous 7.2m run cannot be met by three of these: you would get three 2.4m pendants with visible gaps and three sets of drops. That is a design decision rather than a defect, but one to make before the drawing is issued.
What should I use if I need a continuous line?
Ask us about the Domus MAX profile range a different product family sold as recessed, surface and suspended profiles, and the one designed for continuous runs. Note the confusingly similar name: the MAX-50 is not the Maxi 50. They are separate ranges with different SKU blocks and different wattages, and every MAX listing carries a datasheet where none of the 18 Maxi 50 listings does.
How should I space a run of these?
Deliberately, and check both the look and the light. Visually, half a fitting length or more reads as a rhythm while a small gap reads as a continuous run that failed to join the uncomfortable case, because it looks like a mistake rather than a choice. Optically, the 120 degree beam spreads to roughly 3.5 times the mounting height, so at 1m above the plane each fitting covers about 3.5m and gaps up to about 1m keep the level even.
What else makes a row look wrong?
Drop height and finish. Keep the drops identical a height variation across a row is more visible than a spacing variation. And use one finish per run, since Domus publishes one output figure per listing rather than one per finish, so a mismatch cannot be dimmed back into line.
What do discrete pendants give me that a continuous line does not?
Three things. Individual switching and dimming if you circuit them separately, so you can light half a room. A failure that affects one fitting rather than the whole line which matters because this is an integrated LED with no lamp, and a spare from the same batch is a straight swap. And the freedom to set the rhythm to suit the furniture rather than the other way round.
How many fixings will a run need?
Two suspension points per 2.4m fitting, so a run of three is six fixings into structure. The spacing is not published on any listing in the range, nor is the drop adjustment or the weight ask us for all three before setting out, because they are settled before the ceiling closes.
What load should I allow for a run?
48W per fitting at exactly 20.0 W/m, so a run of three is 144W and any mixed layout is total metres 20. That rule holds across every length and both linear ranges, because they all run the same strip.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.