Your shopping cart is empty!
The Domus Maxi 50 is a 1.2m suspended LED linear pendant 24W, 2160lm, 3000K atCRI90, dimmable, in a black body, in six finishes.
Domus asks you to call and confirm it. We will.
| Finish | What it gives | What it costs |
|---|---|---|
| Opal | The most uniform face no visible brightness variation across or along it | Passes less light |
| Frosted | More output of the two | A slightly less even face, most visible at a shallow angle |
| Specification | Value |
|---|---|
| Light output | 2160lm 90lm/W |
| Colour rendering | CRI90 at 3000K |
| Light engine | PLEX-COB-20W a continuous emitter |
| Power / length | 24W at 240V 1200mm |
| IP rating | IP20 dry interior only |
| Suspension | 3m drop supplied |
| Dimming | Integral driver minimum level not published |
| Warranty | 3 years, replacement |
| Per-finish output lifespan | Not published |
1.2m suspended LED linear pendant. 2160lm, 24W (90lm/W), 3000K,CRI90. IP20. 1200mm. 3m drop. PLEX-COB-20W strip, integral dimmable driver, DALI and emergencyon request. Black powder-coated aluminium body. Prismatic, frosted, honeycomb, opal, black or clear finish.3-year replacement warranty. Order code MAXI-50-1.2M-B-3K. THE ENGINE IS A COB STRIP a continuous phosphor layer, so the lit line is already unbrokenbefore any diffuser is fitted, and there are no individual LEDs to conceal. What separates opal fromfrosted is DENSITY: opal gives the most uniform face and passes less light; frosted gives more output and aslightly less even face. Opal close and side-on, frosted above head height.
Supplied and supported by Lights For You.
What is the difference between opal and frosted?
Density, and it trades smoothness against output. Opal gives the most uniform face no visible brightness variation across or along it and passes less light. Frosted gives more output of the two and a slightly less even face, most visible at a shallow angle. The rule is opal where the fitting is seen close and side-on, frosted where it is above head height and the output matters.
Is it about hiding the individual LEDs?
No, and that is worth clearing up. The engine is a PLEX-COB-20W strip chip-on-board, meaning many small emitters under a single continuous phosphor layer rather than a row of separately packaged LEDs. So the lit line is already continuous before any diffuser is fitted. There are no individual LEDs to conceal and no scalloping to smooth out, which is the usual reason for choosing a dense diffuser and it does not apply here.
How much light does opal cost me?
Not published. Domus gives one output figure for the listing 2160 lumens rather than one per finish, so what we can tell you is the mechanism and the direction, not the number. If the decision turns on it, ask us and we will get the per-finish transmission from Domus.
Which finish over a bar or a booth?
Opal, usually. At 1.2m the fitting suits a short bar, a booth, a two-seat counter or a 1.8m table, and at that scale it sits close to the eye which is where opal’s uniformity earns its place. Clear is the wrong finish here, prismatic is a workplace optic that reads technical in a hospitality room, and honeycomb is a visible texture that does the same.
Why CRI90 at 3000K over a bar?
Because warm light and accurate colour usually pull against each other. Most commercial linear lighting at 3000K publishes CRI80, where reds flatten and over a bar that is exactly what shows in a garnish, a cocktail or a cut of meat. CRI90 means the fitting that disappears against a dark ceiling also renders the food properly.
Do I need a dimmer?
Over a booth or a bar, yes. 2160 lumens at full output is a working light, right for prep and wrong for the evening. It ships with an integral dimmable driver and DALI is available on request, but the minimum level is not published. Tell us your control and the level you want during service and we will confirm both with Domus.
Can I use it in a damp space?
No IP20, dry interior only. For bathrooms, covered outdoor areas, commercial kitchens or unsealed bays, ask us about the Domus IMPACT range at IP66 and IK10.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.