Welcome To our shop !

Domus Nova-20 SM 20X10MM P/M C/W Opal Diff & Ec

$16 $20
SKU: KO80391096041
Availability: in Stock

The Domus NOVA-20 SM is a surface-mounted aluminium LEDprofile, sold per metre with a flat opal PMMA diffuserand end caps, in three finishes. & Ec means end caps and on…

Qty:

The Domus NOVA-20 SM is a surface-mounted aluminium LEDprofile, sold per metre with a flat opal PMMA diffuserand end caps, in three finishes.

& Ec means end caps and on a per-metre product, how many is a real question
  • Every Domus profile title ends C/W … Diff & Ec complete with the diffuser and end caps. No listing says how many end caps,or whether the count follows the metres.
  • It matters because the arithmetic is not obvious. A single 2m runneeds TWO caps. Two separate 1m runs need FOUR the samemetreage, twice the caps. And a 5m run made from two pieces needs only two, becausethe joint is butted rather than capped.
  • So a per-metre order cannot infer the cap count from the metres. Tell usthe NUMBER OF RUNS as well as the total length that is the figure that setsit.
  • Why it is worth getting right: an uncapped profile end shows the raw extrusion, the stripand the wiring. Under a bench at eye level that is the first thing anyonenotices, and a missing cap on a Friday afternoon stops the job.
  • One further point on a run that ends into a wall: the cap is still worthfitting it keeps dust and vapour out of the channel, which is the thing Domusitself names as what damages LEDs.
Surface, per metre the low-risk combination

This is the least committal profile purchase in the family. Surfacemounting needs no groove, so the range’s unpublished width costs you nothing; per-metreordering means you buy the exact runs you have; and if the layout changes, the profileunclips and re-fixes. The one thing it still needs is a straight substrate the clips hold the profile true, not the shelf.

Not a light fitting

No strip, no driver. Domus IP54 strip range, with aremote driver that needs somewhere accessible to live.

The specification
Specification Value
Installation Surface mounted, sold per metre no groove
Maximum continuous length 3m
Nominal size 20 10mm no actual dimension published
Diffuser Flat opal PMMA
Supplied with End caps count not published
Material / finish Extruded aluminium aluminium, black or white
Compatible strip Domus IP54 range not included
Driver Not included
Order code LP-2010-SM
Made to order, cut to length

No lead time is published. Call our team to confirm. We will.

Where it works
  • Several short runs and tell us how many.
  • Retrofit into finished joinery.
  • Under-shelf, pelmet and wardrobe.
  • Not on a bowed run.
  • Not without a strip and driver.
Specifying it

Surface-mounted LED strip profile, sold per metre, 3m maximum continuous length. Nominal20 10mm. Flat opal PMMA diffuser and end caps. Extruded aluminium in aluminium, black or white. Forthe Domus IP54 strip range. Order code LP-2010-SM. “& Ec” MEANS END CAPS, AND NO LISTING SAYS HOW MANY. The arithmetic is not obvious: one 2m runneeds TWO caps, two separate 1m runs need FOUR the same metreage, twice the caps and a 5m run in twobutted pieces needs only two. SO TELL US THE NUMBER OF RUNS, not just the total length. An uncapped endshows the raw extrusion, the strip and the wiring, and under a bench that is the first thing anyonenotices.

Supplied and supported by Lights For You.

Questions

What does “& Ec” mean in the title?

End caps. Every Domus profile title ends “C/W … Diff & Ec” complete with the diffuser and end caps. What no listing says is how many end caps, or whether the count follows the metres you order.

Why does the count matter?

Because the arithmetic is not obvious. A single 2m run needs two caps. Two separate 1m runs need four the same metreage, twice the caps. And a 5m run made from two pieces needs only two, because the joint is butted rather than capped. So a per-metre order cannot infer the cap count from the metres.

What should I tell you when ordering?

The number of runs as well as the total length. That is the figure that sets the cap count, and it is the one piece of information a per-metre order does not carry. It takes a sentence and avoids the most common shortfall on a profile job.

What happens if I am short a cap?

An uncapped profile end shows the raw extrusion, the strip and the wiring. Under a bench at eye level that is the first thing anyone notices, and a missing cap on a Friday afternoon stops the job. It is a small part with a disproportionate effect on both the finish and the programme.

Do I need a cap where the run ends into a wall?

It is still worth fitting. Even where nobody sees the end, the cap keeps dust and vapour out of the channel which is exactly what Domus itself names as the thing that damages LEDs. So the cap is doing a job beyond the visual one.

Why is surface plus per-metre a low-risk choice?

Because it is the least committal profile purchase in the family. Surface mounting needs no groove, so this range’s unpublished width costs you nothing. Per-metre ordering means you buy the exact runs you have rather than sticks plus offcuts. And if the layout changes, the profile unclips and re-fixes. The one thing it still needs is a straight substrate.

Does it include a strip or driver?

Neither. It is complete with the flat opal PMMA diffuser and end caps. It is for the Domus IP54 strip range, with a remote driver that needs somewhere accessible to live a driver in a sealed cavity is one you cannot replace, and it fails before the LEDs do.

Only logged in customers who have purchased this product may leave a review.

Shipping policy for our store

We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.

  • Fast shipping within 1-3 business days
  • Free shipping on orders over $40
  • 30 days money back guarantee
  • 24/7 online customer support
  • Secure packaging & safe delivery

Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.