Your shopping cart is empty!
The Domus PLEX-MICRO is a 24V COB LED strip 8W per metre, CRI 90, IP54, 1m,in 2700, 3000, 4000 or 5000K at 640 to 720lm per metre.
The PLEX-MICRO sheet repeats the range’s rule verbatim: All LED strip must beinstalled on an aluminium heat sink, failure to do so WILL VOID WARRANTY. On a narrow strip that is a sharper constraint than usual, because the profilehas to be narrow too and the catalogue’s 47 profiles do not state which stripsthey suit. Tell us the strip and the gap and we will match a profile that fitsboth.
Its record carries a single metafield the IP rating. No wattage, novoltage, no colour temperature, no beam angle, no warranty. Everything above comes fromthe datasheet attached to a sibling variant. It is the clearest single example of thepattern this programme keeps finding: the figures exist, they are just not in the fields, and a metafieldaudit would report this product as having no specification at all.
| Specification | Value |
|---|---|
| LED density | 480 or 560 per metre its own sheet says both |
| Either way | Genuinely dotless 1.8 to 2.1mm spacing |
| Output | 640 / 680 / 720lm per metre 8090lm/W |
| Load | 8W per metre at 24V DC |
| Format | Narrow for gaps a 10mm strip will not fit |
| Cutting increment | 50mm twice PLEX-COB’s |
| Continuous run | 5m one-end 10m two-end |
| Aluminium heat sink | MANDATORY and it must be narrow too |
| Metafields on this record | One the IP rating |
| Colours / CRI / beam | 27005000K CRI 90 180 |
No lead time is published. Call our team to confirm. We will.
Narrow COB LED strip, 1m. 8W per metre at 24V DC. 640lm at 3000K,680 at 4000K, 720 at 5000K. CRI 90. IP54. 180 beam. 50mm cutting increment. Continuousrun 5m one-end, 10m two-end. Aluminium heat sink mandatory. ITS OWN DATASHEET GIVES TWO DIFFERENT LED DENSITIES 480 per metre in the title line and 560in the specification body, a 17% difference in the figure that defines a dotless strip. Either is denseenough to be genuinely dotless, so the contradiction affects the record rather than the appearance. ANDTHIS LISTING PUBLISHES A SINGLE METAFIELD, the IP rating everything else here comes from a datasheetattached to a sibling variant.
Supplied and supported by Lights For You.
How many LEDs per metre does it have?
Its own datasheet says both 480 and 560 480 in the title line and “Number of LED Per Metre: 560” in the specification body. That is a 17% difference in the single figure that defines a dotless COB strip, one document giving two answers.
Does that affect what I get?
Not visibly. At 480 per metre the LED spacing is about 2.1mm and at 560 it is 1.8mm both far below the threshold where individual points become visible through a diffuser. So the contradiction affects the record, not the appearance. Either way it is less dense than the PLEX-COB range’s 640 per metre, which is consistent with MICRO being the narrower, lower-output product.
What is PLEX-MICRO for?
Places a standard 10mm strip will not fit slim shadow gaps, thin shelf edges, narrow profiles, tight reveals. The difference from PLEX-COB is physical rather than electrical: at 8W per metre and 640 to 720 lumens it sits between the 5W and 10W PLEX-COB strips in output.
What should I watch out for?
The cutting increment. It is 50mm, twice PLEX-COB’s 25mm, so lengths have to round to a coarser step. On short decorative runs that is worth checking before you commit to a joinery dimension a 380mm shelf edge does not divide by 50.
Does it need a profile too?
Yes, and the requirement is sharper here. The PLEX-MICRO sheet repeats the range’s rule verbatim: all LED strip must be installed on an aluminium heat sink, failure to do so will void the warranty. On a narrow strip the profile has to be narrow too, and the catalogue’s 47 profiles do not state which strips they suit. Tell us the strip and the gap and we will match a profile that fits both.
Why does this page show so little?
Because its record carries a single metafield the IP rating. No wattage, no voltage, no colour temperature, no beam angle, no warranty. Everything on this page comes from the datasheet attached to a sibling variant. It is the clearest example of a pattern this catalogue shows throughout: the figures exist, they are just not in the fields.
How far will it run?
5 metres from one end or 10 metres fed from both, the same as PLEX-COB. Feeding from both ends halves the current each half carries, so the drop halves too same driver, one extra cable, twice the unbroken length.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.