Welcome To our shop !

Domus Pleo 6.5X11MM Rigid Profile 3000mm

$27.2 $34
SKU: KO80391096169
Availability: in Stock

The Domus PLEO 6.511mm Rigid Profile is an aluminiumchannel for PLEO neon flex and LED strip 3m lengths, withmounting clips, in polished aluminium. Which profile takes which flex the pairing…

Qty:

The Domus PLEO 6.511mm Rigid Profile is an aluminiumchannel for PLEO neon flex and LED strip 3m lengths, withmounting clips, in polished aluminium.

Which profile takes which flex the pairing nothing states
  • Domus sells the Pleo profiles in three sections 4 8, 6.5 11 and10 10mm and the PLEO flex in sections named the same way. The naming is the clue, and it is a good one.
  • Two flex listings in the range carry a section in their own titles: a 6.5 11mm sideview and a 10 10mm top view. So the 6.5 11 profile is made for the6.5 11 flex, and this is that profile.
  • But no listing says so explicitly, on either side. No profile names acompatible flex; no flex names a compatible profile. The match has to be made byreading the two numbers.
  • Which is workable but fragile. A 6.5mm-wide flex in a10mm channel rattles and sits crooked; a 10mm flex will not enter a6.5mm one at all. Tell us the flex and we will confirm the profile.
Do you even need a profile? Sometimes not.
  • PLEO flex is IP67 in a polyurethane enclosure and comes with its own mountingclips. It is a complete, weatherproof, self-supporting product unlike a bare LED strip, which needs a channel to survive.
  • So a profile is OPTIONAL here, and it is worth knowing what it actually buys you:
    • A straight line. Flex follows whatever it is clipped to; a rigid profilecorrects the substrate. Over a long straight run on imperfect joinery that is themain reason.
    • A finished edge. In a reveal or a recess, an aluminium channel gives acrisp shadow line where bare flex gives a soft one.
    • Physical protection at low level or anywhere it can be knocked.
    • A recess detail the Pleo profile does recessed OR surface from one part.
  • What it does not buy you is diffusion. The flex is already a diffusedline which is the opposite of the bare-strip case, where the profile’s depth isdoing the optical work.
Rigid, 3 m and what that suits

A rigid profile in a 3m stick is for one long straight run fewer joints than metreage, and a straightedge that corrects a bowed substrate. For a curve, the bendable version of the same section is the answer; for several short runs, the per-metre listing quotes the job better. Tell us the run lengths and the number of runs the run count is what sets end piecesand feed points.

What is published
Specification Value
Section 6.5 11mm matches the 6.5 11 flex
Form / length Rigid, 3m customisable
Mounting Recessed OR surface one part
Supplied with Mounting clips
Finish Polished aluminium powder coat on request
Houses PLEO neon flex and compatible LED strip
Order code LP-0611-RG-3M
Compatible flex named Not on this listing, nor on any flex listing
Max strip width diffuser IP warranty Not published
Flex / strip / driver Not included
Made to order, cut to length

No lead time is published. Call our team to confirm. We will.

Where it works
  • Long straight runs on imperfect joinery it corrects the line.
  • Reveals and recesses a crisp shadow line.
  • Low-level runs physical protection.
  • Not for a curve take the bendable version.
  • Not needed at all if the flex is simply clipped to a straight, protected surface.
Specifying it

Rigid aluminium profile, 6.5 11mm, 3m. Recessed or surface mounted. Supplied withmounting clips. Polished aluminium, powder coat on request. Houses PLEO neon flex and compatible LED strip.Order code LP-0611-RG-3M. THE PROFILE SECTIONS AND THE FLEX SECTIONS SHARE NAMES, AND NOTHING PUBLISHED STATES WHICH PAIRSWITH WHICH no profile names a compatible flex, and no flex names a compatible profile. The 6.5 11profile is made for the 6.5 11 flex, and the match has to be made by reading the two numbers. AND A PROFILE IS OPTIONAL HERE: PLEO flex is IP67, self-supporting and comes with its own clips, so theprofile buys a straight line, a crisp edge and protection not diffusion.

Supplied and supported by Lights For You.

Questions

Which flex does this profile take?

The 6.5 x 11mm PLEO flex the sections share names, and that is the clue. Two flex listings in the range carry a section in their own titles: a 6.5 x 11mm side view and a 10 x 10mm top view. So this profile is made for the 6.5 x 11 flex.

Does anything say so explicitly?

No, and that is the gap. No profile listing names a compatible flex, and no flex listing names a compatible profile the match has to be made by reading the two numbers. That is workable but fragile: a 6.5mm-wide flex in a 10mm channel rattles and sits crooked, and a 10mm flex will not enter a 6.5mm one at all. Tell us the flex and we will confirm the profile.

Do I even need a profile?

Often not, and it is worth knowing. PLEO flex is IP67 in a polyurethane enclosure and comes with its own mounting clips it is a complete, weatherproof, self-supporting product, unlike a bare LED strip which needs a channel to survive. So the profile is optional here.

What does the profile actually buy me?

Four things. A straight line, because flex follows whatever it is clipped to while a rigid profile corrects the substrate the main reason on a long run over imperfect joinery. A finished edge, since an aluminium channel gives a crisp shadow line in a reveal where bare flex gives a soft one. Physical protection at low level. And a recess detail, since the Pleo profile does recessed or surface from one part.

What does it not buy me?

Diffusion. The flex is already a diffused line, which is the opposite of the bare-strip case where the profile’s depth is doing the optical work. If you are running flex, choosing a deeper profile gains you nothing optically.

When is the 3m rigid stick the right format?

For one long straight run fewer joints than metreage, and a straightedge that corrects a bowed substrate. For a curve, the bendable version of the same section is the answer. For several short runs, the per-metre listing quotes the job better.

What do you need from me to quote it?

The run lengths and the number of separate runs. The run count is what sets the end pieces and the feed points, and metreage alone does not carry it. Tell us the flex you are using as well, and we will confirm the section matches.

Only logged in customers who have purchased this product may leave a review.

Shipping policy for our store

We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.

  • Fast shipping within 1-3 business days
  • Free shipping on orders over $40
  • 30 days money back guarantee
  • 24/7 online customer support
  • Secure packaging & safe delivery

Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.