Welcome To our shop !

Madna Aluminium Black Bollard Light with Spike

$34.995 $69.99
SKU: KO80391096555
Availability: in Stock

The Madna is the tall one in this group, and 15 mm matters more than it sounds. At615 mm it stands just above the 600 mm Vertex columns beside it,…

Qty:

The Madna is the tall one in this group, and 15 mm matters more than it sounds. At615 mm it stands just above the 600 mm Vertex columns beside it, which is enough to liftthe light source clear of low mounding and mature ground cover the single most common reason a gardenbollard stops working two seasons after it was installed. The 3 W built-in LED gives 110 lm at3000K, 120 lm at 4000K and 115 lm at 5500K through a 120 spread, the same photometry as theVertex, delivered from slightly higher up.

What height buys in a planted bed

A bollard lights the ground in a cone. Raise the source and the cone gets wider and softer at itsedge; drop it behind a clump of liriope and it lights the clump. If you are threading a path throughplanting that will fill in and most planting is chosen to the taller column is the one that stillworks in year three. In open gravel or against paving the extra height gains you little, and the60 mm Vertex is the cleaner-looking choice. The body here is the samealuminium with a poly powder-coated black finish, IP65 andIK08, on a 210 mm spike.

24 V DC, and the tri-colour is wired, not switched

The Madna takes 24 V DC and must be run from a suitable 24 V DC LED driver. Much ofthe Havit garden range sitting next to it is 12 V DC, and mixing the two on one supply does not work ineither direction. Do not connect the fitting directly to 240 V. Colour temperature is selected the sameway as the rest of this platform: the neutral cables are labelled, your electrician connects the 3000Kor 5500K conductor, or joins both to produce 4000K, and the joint is then soldered and heat-shrunk. Itis a permanent choice made at installation, not a setting on the fitting.

The conditions Havit attaches
  • 25 m maximum cable distance from the driver, and the supply within 5%.Stated as a warranty condition, not advice.
  • Every connection watertight, and none submerged glue-lined heat shrink or a gelcap, with the run wired in parallel.
  • Built-in LED, sealed and not replaceable, rated over 30,000 hours. Notdimmable.
  • CRI above 80 and SDCM under 6, which is what keeps a row of themlooking like one colour rather than several.
  • 3 Years Replacement warranty.

Lights For You tends to reach for the Madna when a client’s planting plan is more ambitious thantheir lighting plan ask us and we will tell you honestly whether the extra height earns its keep.

Questions

How is this different from the Vertex bollards?

Height and head shape. The Madna stands 615 mm where the Vertex columns are 600 mm, on the same 60 mm body. Wattage, lumen output, colour temperatures, beam angle and every rating are the same, so it is a decision about how the fitting sits in planting rather than about light.

Is 15 mm really worth choosing over?

Only in one situation, but it is a common one: beds that fill in. Ground cover and low mounding grow up around a bollard and start blocking the light within a couple of seasons, and a slightly taller column stays clear for longer. In gravel or against paving it makes no practical difference.

Can I use it on a 12 V system?

No. It is 24 V DC and needs a 24 V DC LED driver. A good deal of the Havit garden range is 12 V DC, so if you are adding to an existing run, confirm the driver first this is the most frequent ordering mistake on this platform.

How do I set the colour temperature?

Your electrician selects it by cable during installation: connect the labelled 3000K or 5500K neutral, or join both for 4000K. The connection is then soldered and sealed in heat shrink to maintain the IP rating, so treat the colour as fixed once installed.

What happens if the driver is more than 25 m away?

Havit states that the warranty is void the fitting must sit within 25 m of the LED driver and receive its rated voltage within 5%. On low-voltage runs the volt drop over distance is real, so this is worth designing around rather than discovering.

Can it be dimmed?

No. Both of its sheets list it as not dimmable, and the built-in LED cannot be swapped for a dimmable lamp.

Will a run of them match in colour?

They should. Havit specifies SDCM under 6 and CRI above 80 for this fitting, which is the tolerance that stops adjacent units reading as visibly different shades of white.

Only logged in customers who have purchased this product may leave a review.

Shipping policy for our store

We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.

  • Fast shipping within 1-3 business days
  • Free shipping on orders over $40
  • 30 days money back guarantee
  • 24/7 online customer support
  • Secure packaging & safe delivery

Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.