TRI-Colour 9in1 GU10 Globe Triac Dimmable

This is a replacement LED globe – the lamp itself rather than a fitting. It goes into a fitting you already have.

The reason to change one is usually not that the old one failed. A globe sets the colour and the quality of the light in every fitting it sits in, so replacing globes is the cheapest way to change how a whole room feels: the same fittings with a warmer colour temperature read as a different room.

Check the base type and the voltage before ordering. A globe that does not match the fitting either will not fit or will not last, and low-voltage globes need the right transformer behind them.

Light output and colour

The colour temperature is 3000K, 4000K, 5500K.

The beam spread is 60.

Where it can be installed

At IP20 this fitting has no weather protection and is for dry interior positions only.

It is made from aluminium.

Powering and installing it

It uses a GU10 base. Check that against the fitting you are putting it into before ordering.

Plan the cable route before anything is fixed. It is the part of an installation that cannot be changed afterwards without undoing the rest of it, and it is the reason otherwise finished jobs get left half done.

Before you order

Two checks save most of the problems that show up after an installation is finished. The first is where the fitting will actually be seen from: a light chosen for how it looks in a product photograph is being judged from a viewpoint nobody will ever stand in, and the same fitting can be discreet from the house and glaring from the street.

The second is what else is going in around it. A single fitting is rarely the whole scheme, and matching colour temperature and finish across everything in a space matters more to the result than the specification of any one item in it. Mixed colour temperatures in particular read as a fault rather than as a choice.

If you are unsure whether this suits what you are lighting, our team at Lights For You will talk it through against the actual space rather than the specification sheet.

Frequently asked questions

Can it go outside?

No. At IP20 it has no weather protection and is for dry interior positions only.

Do I need an electrician?

Yes. Connecting a fitting to mains is licensed electrical work in Australia.

What warranty does it carry?

3 Years*

Is anything else needed to install it?

Plan the cable route before fixing anything – it is the part that cannot be changed later without undoing the rest.