Welcome To our shop !

Viper 10w per metre 5m COB LED Strip Kit – IP54 complete with Dimmable LED driver

$57.5 $115
SKU: KO80391096373
Availability: in Stock

Viper 10w per metre 5m COB LED Strip Kit - IP54 complete with Dimmable LED driverThis is a complete LED strip kit. Unlike a bare reel it arrives with the…

Qty:
Viper 10w per metre 5m COB LED Strip Kit – IP54 complete with Dimmable LED driver

This is a complete LED strip kit. Unlike a bare reel it arrives with the driver it needs, so it is a finished lighting run rather than one component of one.

That matters more than it sounds. The most common mistake with strip lighting is buying the strip and discovering afterwards that it needs a separate driver, sized correctly, before it will light at all.

Output and colour

This strip draws 10W per metre, producing 810lm per metre.

Both figures are per metre, not per reel. A long run multiplies them, and that is the number that decides the driver.

It is a 5500K product – one fixed colour temperature.

This is a cool white, close to daylight. It reads as bright and precise, which is what suits a garage, a laundry, a display case, a workshop or any job where seeing detail matters more than atmosphere.

Cool light in a living space is the most common colour-temperature regret. It makes a room feel like a workplace, and the effect is far stronger at night than the specification suggests.

Colour rendering is >90 CRI, which describes how faithfully colours appear under the light. It matters most where the lighting falls on food, skin, timber or fabric.

The beam spread is 120.

Where it can be installed
What is in the kit

The strip and its driver are supplied together and matched to each other, in a 5 metre length. The driver connects to 240V mains and feeds the strip at 24V DC.

The mains connection is licensed electrical work. The kit removes the sizing decision, not the electrician.

Cutting and installing it

Strip is cut to length at the marked cutting points only. Cutting between them severs the circuit and kills everything past the cut, so plan the run to the nearest marked point rather than to the exact millimetre.

Run it in an aluminium profile. The aluminium draws heat away, which is the single biggest factor in how long a strip holds its brightness, and the diffuser turns the line of separate LEDs into a continuous one.

Test the run before committing it. Adhesive backing does not survive being lifted and re-laid well, and a fault found after the diffuser and end caps are on means taking the whole run apart.

This strip is dimmable. Dimming happens at the driver rather than at the strip, so the driver and the dimmer have to match.

Frequently asked questions

Do I need anything else?

The driver is included, so the kit is complete as supplied. The mains connection still has to be made by an electrician.

Is the wattage per metre or per reel?

Per metre. 10W is what one metre draws, so multiply by the length of your run before sizing a driver.

Can I cut it to length?

Yes, but only at the marked cutting points. Cutting between them kills the section past the cut.

Is it dimmable?

Yes, at the driver. The driver and the dimmer have to use the same dimming method.

Do I need an electrician?

For the mains connection to the driver, yes. That is licensed electrical work in Australia.

What warranty does it carry?

3 Years*

Only logged in customers who have purchased this product may leave a review.

Shipping policy for our store

We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.

  • Fast shipping within 1-3 business days
  • Free shipping on orders over $40
  • 30 days money back guarantee
  • 24/7 online customer support
  • Secure packaging & safe delivery

Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.