Your shopping cart is empty!
A garden bollard kit in black aluminium, supplied with a spike so the fitting pushes into soft ground rather than needing a footing. Each light draws 1W and produces 30lm to 35lm on white deliberately small figures, because this is a marker light rather than a path light.
That distinction matters before ordering. A 1W bollard defines an edge, picks out a bed boundary or marks the line of a path so it can be followed after dark. It does not light the ground well enough to read the surface by, and a run of them is not a substitute for proper path lighting.
This is the RGBCW version: red, green and blue for colour plus dedicated warm and cool white channels. Colour, white and dimming are all handled by app or remote rather than from a wall switch. Colour rendering on white is above 80 CRI and the beam is 120.
Decide who will hold that control before installing, because on a colour fitting it decides whether the feature is used at all. A colour garden run driven from an app nobody has set up ends up sitting on white permanently which is a lot to pay for a white marker light.
The Drique runs on 24V DC. It does not connect to mains, and a 24V DC driver is required on the circuit for the fitting to light. Confirm the driver is specified and sized for the number of fittings before ordering.
That check is the single most useful thing to do on a low-voltage garden kit. A bollard delivered without a driver on site is a bollard that sits in its box until someone makes another trip.
The fitting itself is Class 3 low voltage and its driver is Class 2, so no earth is required at either. Installation is work for a licensed electrician.
A spike suits dug garden beds, mulched areas and lawn edges ground that gives. It is not suitable for hard clay or compacted fill, where forcing the spike bends it and leaves the bollard leaning.
The advantage is that the fitting can be moved. As planting fills in and a bed changes shape, a spiked bollard is repositioned by hand rather than dug out and re-concreted. The fitting is rated IP65 for dust and jetted water and IK08 for impact, with rated lamp expectancy of >30,000 hrs.
How bright is each light?
30lm to 35lm on white from a 1W fitting. It is a marker light, not a path light.
Does it need a driver?
Yes. It runs on 24V DC and requires a 24V DC driver for the fitting to light.
How is it controlled?
By app or remote, which handles colour, white and dimming.
Does it need a footing?
No. It is supplied with a spike for soft ground, and can be repositioned by hand.
Does it need an earth?
No. The fitting is Class 3 and its driver is Class 2.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.