Welcome To our shop !

Prime Coloured Fixed Deep WIFI Downlight 90mm Cutout

$48 $96
SKU: KO80391096495
Availability: in Stock

This is the fixed deep Prime downlight with a full-colour RGBCW engine and Wi-Fi, on a 90mm cut-out, in four coloured metal finishes HV5514RGBCW-AB, HV5514RGBCW-BR, HV5514RGBCW-CP and HV5514RGBCW-NK. It is…

Qty:

This is the fixed deep Prime downlight with a full-colour RGBCW engine and Wi-Fi, on a 90mm cut-out, in four coloured metal finishes HV5514RGBCW-AB, HV5514RGBCW-BR, HV5514RGBCW-CP and HV5514RGBCW-NK. It is the largest of the Prime bodies, recessed deeply, with colour mixing behind a frosted face.

The number to read before anything else

Havit’s ordering row measures 300lm at 3000K and 320lm at 5500K on this model’s white channel. The switched HV5514T same housing, same 90mm hole, same 12W measures 839 to 913lm. Colour therefore costs roughly two thirds of the white light on this body, and nothing about the wattage, the size or the price says so. If these are the only downlights in a living area, plan the layout around 300lm each. The individual colours are lower again red 15lm, green 32lm, blue 25lm since one colour uses one of three emitters.

Colour in a deep housing

Havit rates this model UGR<19, the low-glare figure the deep Prime bodies exist for, against <22 on the shallow HV5511 and HV5512 housings. That is more useful on a colour fitting than on a white one: a saturated source in direct view is far more noticeable than a white one at the same output, and setting it back is what keeps it out of the sightline. The diffuser is frosted perspex, which blends red, green and blue into one colour instead of showing three emitters, and which is why the beam is 120 where the switched version is 60. It is a wash rather than an accent.

Control, dimming and circuits

Colour, white point and level are all set from the TUYA app on a phone or tablet. Dimming happens in the app, not at the wall there is no Triac driver in this version, so it must not be wired to a dimmer plate and should not share a dimmed circuit with the switched HV5514T. Both take the identical 90mm hole, as does the tilting HV5512, so the ceiling does not lock in the decision.

Insulation and the IC-4 condition

It is IC-4 rated, on Havit’s stated conditions: only the LED fitting may sit under insulation, the driver must never be covered and must be mounted above any insulation covering the fixture, and the fixture must not be used with loose-fill insulation such as macerated paper or wool.

Body, rating and warranty

The body is aluminium with a face of 105mm, on 240V AC with flex and plug supplied. Protection Class 2, so no earth is required at the fitting, and IP54 at the front of the fitting only. CRI>90, SDCM<4, IK06, lamp expectancy >50,000hrs. Havit’s warranty line for these part numbers reads “3 Years replacement warranty (items ordered after 01/01/22)”. Two things Lights For You will not tidy: no overall depth is published, because Havit’s drawing carries two unlabelled figures and names neither; and Havit’s ordering row calls the cool white point 5500K while its page copy for the same part numbers says 6500K, so both are reported.

Questions

How much light does it actually give?

300lm at 3000K and 320lm at 5500K on the white channel around a third of the 839913lm the switched HV5514T produces from the same housing and the same 12W. Plan the number of fittings around 300lm.

Why are the colours so much dimmer?

One colour uses one of the three colour emitters. Havit measures red at 15lm, green at 32lm and blue at 25lm, which is normal for a colour-mixing downlight; the colour channels are for atmosphere and the white channel does the work.

What cut-out does it need?

90mm, with a face of 105mm. The switched HV5514T and the tilting HV5512 take the same hole, so an existing 90mm ceiling can take any of them.

Why is the beam 120?

Because the diffuser is frosted perspex, which mixes the three colours evenly rather than showing them separately, and frosting widens the beam. The switched version of this body uses clear glass and a 60 beam.

Is the cool white 5500K or 6500K?

Havit publishes both. Its ordering row for these part numbers gives 5500K alongside the 320lm figure and its page copy for the same part numbers says 6500K, with nothing reconciling the two, so this page reports both rather than choosing.

Can I dim it from a wall dimmer?

No. It is dimmed in the TUYA app and is not listed as Triac dimmable, so it should not be wired to a dimmer plate or share a dimmed circuit with the switched HV5514T.

Can insulation go over it?

It is IC-4 rated, but only the LED fitting may be covered. The driver must never be covered and must be mounted above any insulation covering the fixture, and loose-fill insulation such as macerated paper or wool must not be used with this fixture.

Only logged in customers who have purchased this product may leave a review.

Shipping policy for our store

We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.

  • Fast shipping within 1-3 business days
  • Free shipping on orders over $40
  • 30 days money back guarantee
  • 24/7 online customer support
  • Secure packaging & safe delivery

Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.