Your shopping cart is empty!
Focus adjustable LED spot light with sensorThe Focus is Havit Lighting's adjustable exterior spot, sold here in the sensor version and available in black or white. The head tilts through…
The Focus is Havit Lighting’s adjustable exterior spot, sold here in the sensor version and available in black or white. The head tilts through 90 and swivels through 270, so the fitting is aimed after it is mounted rather than being committed at the point the cable comes out of the wall. That matters more than it sounds: a spot that lights a tree correctly in winter is often pointing at the wrong thing by the time the tree has grown, and a fitting that can be re-aimed is a fitting that stays useful.
The body is polycarbonate rated IP65 against dust and jetted water, with an IK06 impact rating. It is a Class 2 fitting, so no earth connection is required at the fitting itself.
The Focus draws 15W and carries a tri-colour LED. Colour temperature is selected on the fitting rather than fixed at manufacture 3000K, 4000K or 5500K and output follows the selection at 1200lm, 1275lm and 1350lm. The beam is a wide 120, which makes this a wash light for a wall, a hedge or a garden bed rather than a narrow accent on a single object. Colour rendering is rated above 80 CRI. Rated lamp expectancy is >30,000 hrs, and there is no globe to replace the LED is built in.
This fitting is dimmable, but not in the way most exterior fittings are, and it is worth being clear before an electrician quotes the job. Dimming is done through preset settings using the remote that is supplied with the fitting. Havit’s own documentation describes it as dimming by remote only, so it should not be specified on a Triac wall dimmer or a smart dimmer module and expected to respond. If your plan involves dimming the circuit from a wall plate, this is the wrong fitting for that circuit.
The listing is the sensor version, so the fitting also switches on detection rather than only on the circuit.
The Focus runs on 240V AC mains and requires no driver, which keeps the installation to a standard mains connection for a licensed electrician. As a Class 2 fitting it needs no earth at the fitting.
Because the head is adjustable, mounting position and aim are separate decisions fix it where the cable and the surface suit, then aim it once the planting is in. The two part numbers on this page differ only in finish: HV3792T-BLK in black and HV3792T-WHT in white. Lights For You stocks both finishes, and in our experience the choice is made by the wall behind the fitting rather than by the light in front of it.
Can I dim it from a wall dimmer?
No. Dimming is by preset settings using the supplied remote. Havit describes it as remote-only, so it should not be put on a Triac or smart wall dimmer and expected to work.
Is the remote included?
Yes. Havit’s documentation for this fitting states the remote is supplied with it.
Does it need an earth?
No. The Focus is a Class 2 fitting, so no earth is required at the fitting. It still must be connected by a licensed electrician.
How far does the head move?
90 of tilt and 270 of swivel, so it can be aimed after mounting and re-aimed later.
Is there a globe to buy?
No. The 15W LED is built into the fitting, so there is no lamp base and no replaceable globe.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.