Versa is a square up/down wall light whose distinguishing feature isan adjustable beam angle the output can be set between roughly5 and 120. That is unusual in this class of fitting and it is the reason tochoose it: a narrow setting throws a tight, dramatic column up a tall wall, while a widesetting becomes a soft general wash, so the same fitting can be tuned after it ismounted rather than committed to at purchase.

Why the adjustable beam matters

Most up/down lights have a fixed spread, which means the effect is decided atspecification time from a catalogue number. With Versa the installer can stand back,look at the wall and set it. On a high facade a narrow beam reaches further up; on alow courtyard wall a wide beam avoids a harsh hotspot. It also rescues awkwardpositions where the mounting height was not ideal.

Where it works

• Tall facades narrow the beam to carry light up the full height.
• Courtyard and boundary walls widen it for an even, soft wash.
• Exposed positions IP65 rated for direct weather.

Specifying it

Tri-colour selectable at 3000K, 4000K or 5500K, in black or white powder-coatedaluminium, 2 3W built-in LED at roughly 220240lm per direction.IP65 suits fully exposed walls. The LEDs are integrated, so there is no globe to buy.Confirm the supply voltage of the variant you are ordering with your electrician beforewiring, and have it installed by a licensed electrician.

Supplied by Lights For You ask us about 12V driver sizing before you order.

Power and dimming

Versa is a 12V DC fitting on this listing every SKU here is the-12V version. It requires a 12V DC LED driver and must never beconnected directly to 240V. Size the driver for the total load of every fitting on thecircuit, not for one light.

It is not dimmable. Havit’s Triac dimming applies to the 240V modelsonly, so a dimmer will not work on this version do not specify one. The 12V DCversion is Protection Class 3: no earth required.

Questions

How does the adjustable beam angle work?

The optic can be set across roughly a 5120 range,so the spread is chosen on the wall at install rather than fixed by the model. Narrowfor reach and drama, wide for even coverage.

Can I change the beam after installation?

It is adjusted at the fitting, so it can be revisited but thatmeans access to the light. Get it right while the ladder is still there.

Is IP65 suitable for full exposure?

Yes. IP65 covers direct rain and wash-down, so an unprotectedfacade or boundary wall is within rating. In heavy salt air, rinse the powder coat withfresh water periodically.

Does it need a globe?

No. The LEDs are built in and not user-replaceable, so nothing isbought separately and nothing is changed later.

How bright is it?

Roughly 220240lm in each direction from 2 3W,depending on the colour temperature selected. That is accent and facade lighting ratherthan area lighting.