Your shopping cart is empty!
The white Patra is the version to specify on a pale wall. On white render, light brick or off-white cladding a powder-coated white body is far less visible by day than any metal finish, so the run reads as a series of light points at night and as almost nothing in daylight. The fitting is a small surface-mounted marker light with a built-in LED behind clear glass, drawing 1.5W to define an edge or a step. It is 12V: HV3284T-WHT-12V requires a 12V DC LED driver and must never be connected directly to 240V power.
This listing is the white finish. Your remaining decisions are the driver, the spacing and the colour temperature, selected on the fitting: 100lm at 3000K, 110lm at 4000K and 105lm at 5500K. On white render, a warm 3000K keeps the wall looking creamy and residential, while 5500K pushes it towards a cooler, more architectural white a decision worth making on site with a sample rather than on paper.
The Patra requires a 12V DC LED driver and must be installed no more than 25m from it a warranty limit, because voltage drop over a longer run reduces output and shortens LED life. Do not connect the fitting directly to 240V power. It is Class3 low voltage and needs no earth. The LED is built in, so no globe is needed and none can be fitted. It is rated IP65, with IP67 also recorded, giving protection against direct rain and coastal weather, and carries an IK08 impact rating behind a clear glass diffuser. Rated life is over 30,000hours. It is Triac dimmable, which on a 12V circuit means a Triac-dimmable driver.
Supplied and supported by Lights For You; white keeps the Patra invisible against pale render by day, so pick the colour temperature against an actual sample of your wall colour before the whole run is set out.
Does it need a driver?
Yes. It is 12V DC and requires a 12V DC LED driver, which is not included.
Can it be connected directly to 240V?
No. Never connect this fitting directly to 240V power. It runs on 12V DC only.
What is the maximum distance from the driver?
25m. Beyond that, voltage drop dims the light and shortens LED life, and the warranty no longer applies.
Is a globe required?
No. The LED is built in, so no globe is needed and none can be fitted.
How much light does it produce?
100lm at 3000K, 110lm at 4000K or 105lm at 5500K, from 1.5W. It marks edges rather than lighting areas.
Can it be mounted in the weather?
Yes. It is IP65 rated, with IP67 also recorded, and carries an IK08 impact rating.
Is it dimmable?
Yes, Triac dimmable, using a Triac-dimmable 12V driver.
What warranty applies?
A 3-year replacement warranty.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.