Welcome To our shop !

Nella LED Downlight 7w Black, White CCT HV5841S-EXT Havit Lighting

$49.495 $98.99
SKU: KO80391097234
Availability: in Stock

This is the extended-body version of the Nella 7W surface mounted downlight. The light engine is identical to the standard model same 7W built-in LED, same five colour settings, same…

Qty:

This is the extended-body version of the Nella 7W surface mounted downlight. The light engine is identical to the standard model same 7W built-in LED, same five colour settings, same output but the housing is 200mm tall instead of 100mm, so the fitting projects twice as far below the ceiling.

That extra length is a design decision rather than a technical one, and it is the only thing separating this product from its shorter sibling. A longer barrel reads as a deliberate architectural cylinder rather than a low puck, and it drops the light source further into the room useful over an island bench, in a stairwell, or on a high ceiling where a flush fitting disappears into the plane above. If you want the same light with the smallest possible protrusion, the 100mm standard Nella is the one to order.

Light quality

Havit’s data sheet puts this fitting at CRI>90 with SDCM<3 colour consistency and UGR<10 for glare. The deep baffled aperture is doing the work on that last figure the LED sits well back from the opening, which matters more, not less, on an extended body where the fitting hangs in view.

Output follows the colour setting: 499lm at 2700K, 512lm at 3000K, 558lm at 4000K, 593lm at 5000K and 601lm at 5700K, through a 60 beam. The five settings are selected on the fitting during installation, so one product code covers every room in a job.

Installation

This listing is the 240V AC model: no driver in the circuit, wired directly to mains, Protection ClassI with an earth connection required, and wired in parallel across multiple fittings. Dimming is Triac, matched to Havit’s HV9625 dimmer. Because it is surface mounted, there is no cutout to make and no ceiling cavity depth to check only the fixing surface itself.

IP54 covers dust and splashing water from any direction, and the aluminium body is rated IK08 for impact with a lamp expectancy over 30,000 hours. Gold, black and chrome trim inserts fit the same aperture if you want to change the look later.

The fitting carries Havit’s 3 year replacement warranty. Lights For You keeps the standard and extended Nella bodies side by side precisely because the specification sheets do not distinguish them on anything but height so you can choose on proportion, and know the light itself is the same.

Questions

What is the difference between this and the standard Nella 7W?

Height, and nothing else that affects the light. This extended version is 200mm tall against 100mm for the standard body. The LED, the wattage, the five colour settings, the lumen figures, the beam angle and the IP rating are identical across both.

Why would I choose the longer body?

Proportion and drop. On a high ceiling a 100mm fitting can read as a flat disc, while the extended barrel presents as a deliberate cylinder and brings the light source further into the room. Over an island bench or in a stairwell that extra 100mm is usually the better-looking answer.

Does it need a driver?

No. This is the 240V AC model and it wires straight to mains. It is Protection Class I so an earth connection is required, which makes it a licensed electrician’s installation.

Is there a cutout to make?

None. It is surface mounted the fitting fixes to a mounting base against the ceiling, so there is no hole to cut and no need for clearance above the ceiling line.

How bright is it, and can I change the colour?

Between 499lm and 601lm through a 60 beam, depending on which of the five colour settings is selected 2700K, 3000K, 4000K, 5000K or 5700K. The setting is chosen on the fitting at installation.

Can it be dimmed?

Yes, the 240V model is Triac dimmable and Havit lists the HV9625 Triac Dimmer as the compatible control. Use a dimmer rated for LED loads and check its minimum load against the number of fittings on the circuit.

Where can I use it is IP54 enough for outdoors?

IP54 protects against dust and splashing water from any direction, which covers covered outdoor areas such as eaves and alfresco ceilings, as well as bathroom ceilings. It is not rated for immersion or high-pressure water, so confirm the specific zone with your electrician.

Only logged in customers who have purchased this product may leave a review.

Shipping policy for our store

We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.

  • Fast shipping within 1-3 business days
  • Free shipping on orders over $40
  • 30 days money back guarantee
  • 24/7 online customer support
  • Secure packaging & safe delivery

Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.