Your shopping cart is empty!
This is the sensor version of Paso: the same white recessed steplight, with a PIR movement detector built into the faceplate so the light switchesitself on when someone approaches and…
This is the sensor version of Paso: the same white recessed steplight, with a PIR movement detector built into the faceplate so the light switchesitself on when someone approaches and off again afterwards. That changes what it isfor. A plain step light is left on all evening; a PIR Paso is specified where you wantthe stair lit only when it is being used a hallway at 3am, a hotel corridor, astairwell that nobody should have to find a switch for.
The sensor is the reason to buy this variant and also its main constraint. It reactsto movement in front of it across a 180 field, so the mounting position has to seethe approach behind a newel post or facing a wall, it will trigger late or notat all. Where you want continuous low-level light rather than on-demand light, thenon-sensor Paso is the correct fitting.
Rated IP20. That is an indoor-only rating itoffers no protection against water at all, so it must not be used on an external wall, ina bathroom wet area, or anywhere exposed to weather or hose-down cleaning. Recessedinstall, with a 33mm wide by 152mm high cutout, so confirmthe wall cavity and stud positions before cutting.
It runs on 240V and wires straight to mains no driver ortransformer required. The LED is built in: no globe is neededand none can be fitted. Tri-colour selectable at install across 3000K, 4000K and 5500K,giving 45lm at 3000K, 55lm at 4000K and 49lm at 5500Kfrom 3W, with a 180 spread. Installation by a licensed electrician.
Backed by a 3-year replacement warranty.
Supplied and supported by Lights For You; if you are mixing sensor and non-sensorPaso down one corridor, ask us to confirm the faceplates match before you cut the wall.
Does it need a driver?
No. This is a 240V fitting and connects directly to mains, sothere is no transformer or driver to buy or find space for.
Can I use it outside or in a bathroom?
No. IP20 means no water protection whatsoever. Keep it to dryinternal walls an external wall, a shower zone or a position exposed to weatherneeds a properly IP-rated fitting.
What size cutout do I need?
33mm wide by 152mm high. Check the stud and cavitybefore cutting, because the opening is tall enough to clash with noggins in aplasterboard wall.
How does the sensor behave?
It detects movement across a 180 field in front of thefaceplate and switches the light on, then off again once movement stops. Mount it whereit can actually see the approach to the stair, not facing into a corner.
Is there a globe inside?
No. The 3W LED is built in and not user-replaceable, sonothing is bought alongside it and nothing is changed later.
How much light does it give?
45lm at 3000K, 55lm at 4000K and 49lm at 5500K.This is wayfinding light for a stair or corridor, not general room lighting.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.