Your shopping cart is empty!
Onder solid brass tri-colour LED pond lightThis is the Onder in solid brass and solid copper rather than stainless steel the same submersible pond light, built from the metals that…
This is the Onder in solid brass and solid copper rather than stainless steel the same submersible pond light, built from the metals that change as they age. Brass and copper underwater do not stay bright: they darken, then develop the brown-green patina that reads as an established water feature rather than a new installation. If a fitting that looks the same in ten years is what you want, the stainless version is the one; if you want the fitting to disappear into a mature pond, this is.
It carries an IP68 rating for continuous immersion and IK09 for impact the highest impact rating in Havit’s exterior range, which matters for something sitting on the floor of a pond where stones, tools and feet find it.
The fitting draws 5W and is tri-colour, with the colour temperature selected at installation rather than fixed at manufacture: 3000K, 4000K or 5500K, rated at 270lm, 285lm and 300lm respectively. Colour rendering is above 80 CRI and the beam is 120.
Warm 3000K generally suits a brass fitting best, because it works with the metal rather than against it cool white light on warm metal in dark water tends to make the fitting itself look wrong. Rated lamp expectancy is >30,000 hrs.
The Onder takes MR16 LED globes and Havit supplies them with the fitting. That also decides a question people ask later: Havit lists the fitting as not dimmable with the supplied globes. Do not specify it on a dimmed circuit expecting the supplied lamps to respond.
Because the globe is a replaceable MR16 rather than a sealed module, the light source can be changed over the life of the fitting without disturbing the brass body or its seal which on a submerged fitting is the part you least want to touch.
The Onder runs on 12V DC and is a Class 3 low-voltage fitting, so no earth is required at the fitting itself. It does need a 12V driver on the run, and that driver is not part of this listing. Keeping the in-water wiring at low voltage is the reason a submersible light can be specified at all.
The body measures 93mm and stands 117mm tall. Position it before anything is fixed or backfilled water moves light, and a fitting that looks right on a still surface can throw a shifting pattern once a pump is running. Installation is work for a licensed electrician.
Are globes included?
Yes. Havit supplies the MR16 LED globes with this fitting.
Can it be dimmed?
No. Havit states it is not dimmable with the supplied globes.
Will the brass stay shiny?
No, and that is expected. Solid brass and copper darken and patina in water. Choose the 316 stainless version instead if you want an unchanging finish.
Does it need an earth?
No. It is a Class 3 low-voltage fitting running on 12V DC, so no earth is required at the fitting. It does require a 12V driver.
Can it be fully submerged?
Yes. It is rated IP68 for continuous immersion, with an IK09 impact rating.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.