Your shopping cart is empty!
The HV10392T is the four-lamp Luz in poly powder coated white aluminium two GU10 globes aimed up and two aimed down, in the wider of the two Luz bodies. In white it is the version specified on pale rendered columns and light brickwork, where a black fitting would read as a dark bar on the wall all day and the light only matters at night.
Havit supplies four 9-in-1 tri-colour GU10 globes with it. The important number is per lamp, not a total: 240560lm at 3000K, 255595lm at 4000K and 270630lm at 5500K, spanning each globes 3W, 5W and 7W settings. Output rises with colour temperature, so 5500K at 7W is the brightest available. Per lamp this is identical to the two-lamp HV10391T four globes give you a wider spread across a broader pier, not a stronger beam. The beam itself is 60, and that comes from the supplied globe rather than the housing.
Each globe carries its own switches, on the side of the globe, and Havit presets every fitting to 3000K at 7W. With four globes there are four covers to twist off if you want something else, so it is worth settling before the fitting goes up. All four holders are standard replaceable GU10, rated to 35W each 4 35W for this body.
Havit requires the backing plate to be fixed and then sealed at every hole, cable entry and screw holes included; failing to do so voids the warranty, as does modifying the fitting or leaving an o-ring or seal out of place. Silicone goes around the base plate against the wall. The IP65 and IK10 ratings, behind clear glass, describe a fitting that has been sealed properly. It runs on 240V AC mains with no driver or transformer and is Class1, so an earth is required.
Because it is aluminium, Havits current instructions exclude installation within 5km of any salt water environment for aluminium and 304SS fittings; inside that distance the solid brass HV10592T is the four-lamp fitting to specify. Height is 300mm, with a 60mm aperture at each of the four lamp positions and a backing plate taking four 4mm fixings around a 13mm cable entry. We publish no width and no wall projection here: Havits drawing leaves those figures unlabelled and this listing carries neither in its own record. The drawing itself is attached to this page.
It is Triac dimmable, with the HV9625 300W dial dimmer named by Havit as the compatible control. The Lights For You team compiled this page from Havits dated JULY24 and JAN25 documents for this exact part number, and we will happily send the drawing over before you order.
How many globes does it take, and are they included?
Four, and yes Havit supplies four 9-in-1 tri-colour GU10 globes with the fitting. Its own data sheet, the installation sheet and Havits product page for this part number all state four.
Is it brighter than the two-lamp white Luz?
Not per lamp. Each globe is identical, at 240560lm depending on the setting, so the four-lamp version covers more wall rather than lighting the same wall harder. If you want more light in one spot, run the globes at 7W in the narrower body instead.
Which colour temperature is the brightest?
5500K, at up to 630lm per lamp. Output rises with colour temperature on this fitting, so cooler is also brighter here. The dimmest setting is 3000K at 3W, giving 240lm per lamp.
Is the body aluminium or stainless steel?
Aluminium, poly powder coated white. That is what Havits dated data sheet and installation sheet both say for this part number. The stainless steel referred to elsewhere is the grub screws securing the fitting to the backing plate.
Can I use it at a beach house?
Not within 5km of any salt water environment Havits current instructions exclude aluminium and 304SS fittings inside that distance. The solid brass HV10592T is the same four-lamp Luz in a material the clause does not name.
What dimming does it take?
Triac dimming, stated on both of Havits dated documents for this model. Havit names the HV9625 LED dial dimmer (300W max) as the compatible accessory. Bear in mind that with four 7W globes the total load is small, so check the dimmers minimum load if you are running only one fitting.
What must the electrician do to keep the warranty valid?
Seal the backing plate completely, including the cable entry and every screw hole, keep all o-rings and seals correctly in place, silicone the base plate to the wall, and not modify the fitting. Havit states that a failure to seal voids the warranty. The warranty is 3 years replacement for items ordered after 01/01/22, and installation must comply with AS/NZS 3000.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.