Your shopping cart is empty!
The Domus PARK-120-DIFF is a 1200mm LED batten 15W or 30W switchable, tri-colour, prismaticpolycarbonate diffuser, IP20, in three sensor options. No sensor, on/off, or dimming the decision that matters mostNo…
The Domus PARK-120-DIFF is a 1200mm LED batten 15W or 30W switchable, tri-colour, prismaticpolycarbonate diffuser, IP20, in three sensor options.
| No sensor | On/off sensor | Dimming sensor | |
|---|---|---|---|
| When empty | Whatever the switch says | Fully off dark | A low background level |
| On approach | Abrupt full output | Lifts smoothly to full | |
| Feels | Ordinary | Startling; you walk into darkness first | Safe and continuous |
| Energy saved | None | Most | Nearly as much |
| Suits | Switched rooms | Storerooms, plant rooms | Carparks, corridors, stairs |
Domus specifies a microwave sensor. Microwave detects MOTION throughdetecting reflected radio waves, so it works through thin materials and is not confused bytemperature where an infrared sensor detects heat difference and struggles whenthe space is near body temperature. In a hot carpark in summer, infrared can simplystop seeing people. Microwave does not have that failure mode, butit can trigger through a thin partition, which is worth knowing if the fitting backs onto a corridor.
| Specification | Value |
|---|---|
| Length | 1200mm |
| Power | 15W or 30W switchable at the driver |
| Colour temperature | 3000 / 4000 / 5000K DIP switch inside the fitting |
| Beam | 120 |
| IP rating | IP20 dry interior only |
| Body / cover | Sheet metal, white powder coated prismatic polycarbonate diffuser |
| Voltage | 240V |
| Sensor | None, on/off or dimming microwave |
| Warranty | 5 years |
| Lumen output detection range hold time | Not published |
1200mm LED batten. 15W or 30W switchable at the driver. Tri-colour 3000 / 4000 /5000K by DIP switch inside the fitting. 120 beam. IP20. 240V. Sheet metal body, white powdercoated, prismatic polycarbonate diffuser. Microwave sensor options: none, on/off or dimming. 5-yearwarranty. THE SENSOR CHOICE MATTERS MORE THAN THE NAMES SUGGEST. On/off leaves the space fully dark andswitches to full output once you are already in it uncomfortable in a corridor and genuinely unsafe onstairs or in a carpark, where you judge a step in the moment before it triggers. THE DIMMING SENSOR HOLDSA LOW LEVEL AND LIFTS ON PRESENCE, and saves nearly as much. Both need SENSOR-INT-01 to programme, soldseparately.
Supplied and supported by Lights For You.
Which sensor option should I choose?
Dimming, anywhere people walk. On/off leaves the space fully dark and switches to full output once you are already in it, which is uncomfortable in a corridor and genuinely unsafe on stairs or in a carpark you are judging a step or a kerb in the moment before it triggers. The dimming sensor holds a low level continuously and lifts on presence, so you can always see where you are going.
Does dimming save much less energy?
Nearly as much, because the standing level is a fraction of full output. On/off saves marginally more in absolute terms, but the difference is small and the safety and comfort difference is large. Use on/off where nobody walks in cold a storeroom entered from a lit space, a plant room, a cupboard.
What is SENSOR-INT-01?
The programming accessory, sold separately, and required to change any default setting on either sensor model. Order it with the first batch: a sensor left on factory defaults is the commonest complaint about sensor lighting, and without the accessory nothing can be adjusted.
Why a microwave sensor rather than infrared?
Microwave detects motion through reflected radio waves, so it works through thin materials and is not confused by temperature. Infrared detects heat difference and struggles when the space is near body temperature in a hot carpark in summer, an infrared sensor can simply stop seeing people. Microwave does not have that failure mode.
Is there a downside to microwave?
It can trigger through a thin partition, because the same property that makes it robust also makes it less contained. That is worth knowing if the fitting backs onto a corridor or an adjacent room, where the lighting might respond to someone who is not in the space at all.
What is the dual-wattage switch for?
15W or 30W, selected at the driver. If the area turns out too bright, press the switch to halve the output. It is physical and set once per fitting, so decide before the electrician leaves but it means an over-lit space becomes a switch press at handover rather than a change of fittings.
What is not published?
The lumen output, the sensor detection range and the hold time. The last two matter for spacing detection range decides how far apart the fittings can be before there is a gap where nothing triggers. Ask us and we will get them from Domus before you lay out a carpark.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.