Your shopping cart is empty!
The Domus EXIT-REC-24M is a recessed blade LED exit sign 2.5W, 24m viewing distance, 2-hour LiFePO4battery, cutout 305 65mm. Black or white.
Recessed blade LED exit sign. 2.5W. Viewing distance 24m. Cutout 305 65mm.2-hour LiFePO4 battery with easy replacement. Single and double-sided decals included, quick-release decalinstallation, fast-fit mounting. 240V, 50Hz, IP20, 5000K. Operating range040C. Black or white. Warranty 4 years. The title says 4W; the datasheet and its own prose both say 2.5W we have published2.5W. The viewing distance and the cutout are on the sheet and in no field.
Supplied and supported by Lights For You.
Is it 4W or 2.5W?
2.5W. The title says 4W, but the datasheet says 2.5W and its own prose repeats “Complete with 2.5W LED” two sources against one, so we have published 2.5W. It matters for a connected-load calculation across a building, because exit signs run continuously: 4W against 2.5W is a 60% overstatement, and on fifty signs that is a real difference in the figure. Ask us to confirm before a submission.
What does the 24 metre viewing distance mean?
It is how far away the legend remains legible, and therefore how far apart signs can be placed along an escape route which makes it the specification on an exit sign, more than the wattage or the output. 24m is a standard commercial figure and suits most corridors, foyers and retail floors. On a longer sight line you need a larger sign rather than a brighter one, and you should not substitute a shorter-viewing-distance sign into a layout designed around 24m: the gaps are where people fail to find the exit.
Do I need to choose single or double sided?
No, and that is unusually helpful both decals are included in the box. A double-sided sign is needed where people approach from both directions, such as a corridor junction or a lobby; a single-sided one where the sign backs onto a wall. One part covers both, so the decision can be made on site rather than at order stage. The decals fit via a quick-release design, so the legend goes on without dismantling the fitting.
How long does the battery last in an emergency?
Two hours, from a LiFePO4 battery with an easy replacement function. Worth noting because none of the three EVAC emergency lights in this range publishes a duration at all here it is stated. Whether two hours meets your requirement is set by the building’s classification and your electrical designer rather than by the fitting, so check the figure against the design rather than a rule of thumb.
What size opening does it need?
305 65mm a slot rather than a hole, because a blade sign sets into the ceiling and reads edge-on along the corridor. That figure is on the datasheet and in no product field, so it is worth having before the ceiling is set out. The mounting is a fast-fit design, which helps when there are many signs across a building.
Can I put it in an unheated space?
Not in a cold climate. The operating range is 040C, and that 0C lower limit is higher than most fittings in this catalogue many run to 20C or below. An unheated car park or loading dock that drops below freezing overnight is outside the range. Tell us the position and we will find something rated for it.
How easy is the battery to replace?
The datasheet specifies an easy replacement function, which matters more on an exit sign than on most fittings. Exit signs run continuously, so the battery is the consumable and it will need changing well before the fitting does. On a building with many signs, a design that makes replacement quick is the difference between a straightforward maintenance visit and a long one.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.