Weatherproof DC IP67 LED Driver is an electrical device, used to power a light-emitting diode (LED), that protects LEDs by stabilizing the quantity of incoming electrical voltage and current to make sure they dont surpass the maximum voltage rating.

Complex current source circuits require a Weatherproof DC IP67 LED Driver when driving high-power LEDs for illumination to achieve correct current regulation.

A LED driver responds to the changing needs of the LED, or LED circuit, by providing a constant quantity of power to the LED as its electrical properties change with temperature.

Without the proper driver, the LED may become too hot and unstable, therefore causing poor performance or failure.

12W Specifications
– Input voltage: 170-265V 50/60Hz
– 12V DC constant voltage LED driver
– Output voltage: 12V DC
– Wattage: 12W
– Current: 0.15A
– Load: 1.2W – 9.6W
– Minimum Load Per Cable: 1.2W
– Maximum Load Per Cable: 9.6W
– Short circuit, overload and thermal protection
– Built in Active PFC function
– Ambient temperature: -30 to 50C
– Flex & plug included: 1.2m
– IP rating: IP67

Dimensions
– Length: 65mm
– Width: 29mm
– Depth: 20mm

30W Specifications:
– 24V DC Constant voltage
– Wattage: 30W
– Short circuit/ Overload/ Over Temp protection
– Input voltage: 240V AC 50/60Hz
– Maximum distance to light source: 10m
– 5% excess VA should be allowed
– IP rating: IP67 waterproof
– Products passed CE, RoHS Certifications

Dimensions
– Length: 182mm
– Width: 30mm
– Depth: 20mm