Solid copper is the most weather-honest finish in the Tivah range: it starts bright, turns through bronze and settles into a green-brown patina, and it does that faster the closer it sits to salt air. This is the fixed-down version, so the beam is set at manufacture and points down the right choice for a pillar top or a wall where you want light on the paving and nothing thrown into a neighbour’s window. It is IP65 for direct rain, IK10 for impact, and fitted with clear glass over the lamp. Choosing between the three part numbers is a wiring decision, not a cosmetic one.

The choice to make

HV1115T and HV1117GU10T are 240V GU10 fittings and wire straight to mains with no driver. HV1117MR16T is 12V DC on an MR16 lamp and requires a 12V DC LED driver it must never be connected directly to 240V power. HV1115T produces 200560lm at 3000K, 255595lm at 4000K and 270630lm at 5500K depending on whether a 3, 5 or 7W GU10 is fitted; HV1117GU10T and HV1117MR16T both give 270lm at 3000K, 285lm at 4000K and 300lm at 5500K from 5W lamps. Beam options are 60 and 120.

Where it works

• Driveway entry pillars where the copper is expected to patina into the brickwork over time.
• Coastal and beachside walls, where copper weathers rather than corrodes cosmetically.
• Stone and rendered garden walls, throwing a downward pool onto paths and steps.
• Alfresco and pool walls that take direct rain and wash-down.

Specifying it

The lamp is replaceable and the base must match the part number: GU10 lamps for GU10 codes, MR16 for the MR16 code they are not interchangeable. Maximum globe wattage is 35W for a GU10 and 20W for an MR16; these are thermal limits inside a sealed IP65 housing. The GU10 variants are Class1 and require an earth. Rated life is over 30,000hours and the fitting is not dimmable with the supplied globes. Impact rating is IK10, the highest in common use, which makes it a sensible choice at a driveway pillar where mirrors and bins make contact.

Supplied by Lights For You solid copper on this Tivah will patina unevenly if some fittings are sheltered and others are not, so plan the run with that in mind and note that the MR16 code is the only one requiring a driver.

Questions

Which part number needs a driver?

Only HV1117MR16T, which is 12V DC and requires a 12V DC LED driver. HV1115T and HV1117GU10T are 240V and wire straight to mains.

Can the 12V fitting go straight onto mains?

No. Do not connect it directly to 240V power. It must be driven from a 12V DC supply.

Will the copper stay shiny?

No, and it is not meant to. Solid copper patinas outdoors, moving through bronze to a green-brown finish, faster in coastal air.

What is the maximum globe wattage?

35W for a GU10 and 20W for an MR16. These are heat limits in a sealed housing exceeding them is a fire risk and voids the warranty.

Is the globe replaceable?

Yes. Match the base to the part number you own GU10 or MR16. A different base will not fit.

Can it be aimed?

No. This is the fixed-down version; the beam points down and does not adjust. Beam options are 60 and 120.

How tough is it?

IP65 for direct rain and IK10 for impact, with clear glass over the lamp suited to driveway pillars and exposed walls.

Is it dimmable?

Not with the supplied globes.

What warranty is included?

A 3-year replacement warranty.