Your shopping cart is empty!
The Domus SM KIT-312 is a surface-mount frame for1212312mm backlit LED panels 1,200mm long,355mm wide, 66mm deep, in white.
The sheet publishes 36W, 3,010 to 3,415lumens and CRI 80. This product is a frame and emits no light those figures belong tothe PANEL-312-BLT it holds. All four frame products in the catalogue carry the samepattern, and this one’s sheet is flagged verified, which records that the document belongs to theSKU rather than that it describes it. We have published the frame as a frame.
A 1,212312mm panel puts the same 36W over a long narrow area ratherthan a square one. THAT SUITS CORRIDORS, GALLEY KITCHENS, RECEPTION DESKS ANDWORKBENCHES anywhere the space itself is linear and a square fitting wouldlight the walls as much as the work. Two or three in a line read as a continuousrun. In a square room a square panel is almost always the better answer.
For context: the matching 312 panel is 36W, 3,010lm at 3000K, 3,415 at4000K and 3,200 at 5700K, CRI 80, colour switchable by a dip switch on the cable. It uses a flicker-free driver with a harmonic filter, which is a genuinespecification rather than marketing: standard LED drivers can produce a strobing effect that some peoplefind uncomfortable over a working day, and it is one of the few things a panel datasheet can tell you thataffects how a room feels to work in. It is not dimmable.
Stated explicitly on the sheet. Opal diffusers yellow slowly under UV andheat, and the exclusion is the manufacturer saying so. It matters most near windows andin continuously-run spaces. Buy all the panels for one area together so they agetogether a single replacement three years in will not match itsneighbours.
| Specification | Value |
|---|---|
| What it is | A surface-mount FRAME it emits no light |
| Its datasheet describes | The panel and is flagged verified |
| Suits | 1212 312mm backlit panels |
| Frame dimensions | 1,200 355mm 66mm deep |
| Fixing | Intermediate points into framing ends alone will bow |
| Handling | A two-person fix at this length |
| Why linear | Corridors galley kitchens reception desks benches |
| Panel it holds | 36W 3,0103,415lm CRI 80 |
| Driver | Flicker-free with a harmonic filter |
| Warranty | 3 years excludes diffuser discolouration |
Surface-mount frame for 1212 312mm backlit LED panels. 1,200 355mm, 66mmdeep, white. Panel not included. ITS DATASHEET DESCRIBES THE PANEL, NOT THE FRAME 36 W, 3,010 to 3,415 lumens, CRI 80, on anaccessory that emits no light, and the sheet is flagged verified. A 1,200 mm FRAME IS A DIFFERENTPROPOSITION FROM A 600 mm ONE: it needs fixing at intermediate points into ceiling framing, not just at itsends, because a long frame fixed only at the ends bows visibly and shows a shadow line along the panel edgethat is hard to look past once noticed. PLAN THE FIXINGS AGAINST THE JOISTS BEFOREORDERING.
Supplied and supported by Lights For You.
Does this frame produce light?
No. Its datasheet publishes 36W, 3,010 to 3,415 lumens and CRI 80, but this product is a frame and emits no light those figures belong to the PANEL-312-BLT it holds. All four frame products in the catalogue carry the same pattern, and this one’s sheet is flagged verified, which records that the document belongs to the SKU rather than that it describes it.
Is fixing it different from the square version?
Considerably. The square 606 frame is a manageable object one person can hold against a ceiling; a 1,200mm frame is not. It needs fixing at more points and it needs a second pair of hands.
What happens if I fix it only at the ends?
It will bow visibly in the middle, and a bowed frame shows a shadow line along the panel edge that is very hard to look past once noticed. Fix it at intermediate points into ceiling framing, not just into plasterboard.
What should I check before ordering?
The joists. At 1,200mm the frame will cross two or three joists at 450mm centres if it runs across them, and none if it runs along one which is the difference between a straightforward fix and needing noggins. Decide the orientation early for appearance too: a 1,212 x 312mm panel is a strongly directional object and will look either deliberate or accidental depending on whether it aligns with the room.
Why choose a linear panel over a square one?
Because it puts the same 36W over a long narrow area rather than a square one, which suits corridors, galley kitchens, reception desks and workbenches anywhere the space itself is linear and a square fitting would light the walls as much as the work. Two or three in a line read as a continuous run. In a square room a square panel is almost always the better answer.
What is a flicker-free driver worth?
More than it sounds. Standard LED drivers can produce a strobing effect that some people find genuinely uncomfortable over a working day, and the harmonic filter in this driver reduces it. It is one of the few things a panel datasheet can tell you that affects how a room feels to work in.
What is excluded from the warranty?
Diffuser discolouration, stated explicitly. Opal diffusers yellow slowly under UV and heat. It matters most near windows and in continuously-run spaces and it is a reason to buy all the panels for one area together, so they age together rather than a single replacement three years in failing to match its neighbours.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.