Your shopping cart is empty!
The Domus LF-A60 is an 8.6W LED filament globe in the standardA60 household shape 1,055 lumens, inclear or frosted glass, E27 or B22, and2700K or 6500K. Dimmable.
1,055 lumens from 8.6 watts 123lm/W, and the mostefficient globe in this catalogue. For comparison, the decorative G95 and ST64 filamentsmanage around 100lm/W, and a 75W incandescent gave about 15.
It is also brighter than either: 1,055lm against their 750800. If youwant a filament globe that is genuinely doing the lighting rather than just being looked at,this is the one.
A60 is the ordinary household globe shape: 60mm 102mm. That makes it the drop-in filament option:
All the filament globes here share a 15,000-hour life normal for the type,since the filaments sit in a glass envelope with nowhere for heat to escape, and the shortest in thiscatalogue.
This globe is the one most likely to be used as real lighting rather thandecoration, which means it is also the one most likely to be run for long hours.If it is going somewhere that runs all evening every evening, budget forreplacement and put it somewhere reachable.
E27 is the Edison screw common on modern fittings; B22 is thepush-and-twist bayonet still found across older Australian homes. Notinterchangeable check the fitting, not the old globe.
Fully dimmable with a suitable dimmer. Dimmable LED globesare fussy about dimmers tell us which one you have and we will confirm the pairing.
CRI 80, 360 emission,IP20 indoor and dry only, 240V. Warranty 3 years. Our record holds 7.8W and 8.5W; the datasheet says8.6W, which is what we have published.
A60 GLS shape, 60mm 102mm, in clear or frostedglass. 8.6W LED filament (our record holds 7.8W and 8.5W)giving 1,055lm at both 2700K and 6500K 123lm/W. CRI 80, 360 emission,fully dimmable with a suitable dimmer. E27 or B22. 15,000hours. 240V,IP20 indoor and dry only. Warranty 3 years.
Supplied and supported by Lights For You.
How does it compare to the other filament globes here?
It is brighter and more efficient. 1,055 lumens from 8.6 watts is 123 lumens per watt the most efficient globe in this catalogue against 750 to 800 lumens and about 100 lm/W for the decorative G95 and ST64. If you want a filament globe that is genuinely doing the lighting rather than just being looked at, this is the one.
Will it fit where my old globe fits?
Yes A60 is the ordinary household shape, 60 by 102mm, so it goes inside shades, close-fitting pendants, table lamps and ceiling oysters. The decorative G95 at 95mm and the ST64 at 138mm long will not.
Clear or frosted?
Here the choice is practical as well as visual. Clear shows the filaments, which is right in an open fitting or a clear pendant but inside a table lamp with a translucent shade it can show as bright stripes through the fabric. Frosted diffuses, giving even light with no hot spots or filament shadows on the shade, and it is the better choice inside any enclosed fitting. Both give the same 1,055 lumens.
Why only 15,000 hours?
All the filament globes here share it the filaments sit in a glass envelope with nowhere for heat to escape, and heat is what ends an LEDs life. About thirteen years at three hours a day, or three in a caf or hallway running twelve. This is the globe most likely to be used as real lighting rather than decoration, so it is also the one most likely to run long hours: if that is your case, budget for replacement and put it somewhere reachable.
2700K or 6500K?
2700K for almost every use it is the colour that makes a filament look right. 6500K is a cold daylight white and an unusual pairing with a visible filament: it suits a workshop, garage or laundry, and in a domestic pendant or lamp it will look wrong. Unusually, both give 1,055 lumens, so there is no brightness penalty either way.
Can I dim it?
Yes, fully, with a suitable dimmer. Dimmable LED globes are fussy about dimmers, so tell us which one you have and we will confirm the pairing.
How many watts is it?
8.6W per the datasheet. Our own record holds two values, 7.8W and 8.5W, and neither matches the same shape of error appears on all three filament globes we have checked, so we have published the manufacturers figure.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.