Your shopping cart is empty!
The Domus KEY-MR16-GLASS is a 4.7W LED globe in theMR16 shape, 12V DC, with a 60 beam and aglass body, in 3000K or 5000K.
It is a direct size replacement for a conventional halogenMR16 same 50mm face, same 46mm depth, same two-pin low-voltage base.It drops into the fitting the halogen came out of.
What it needs is a proper LED driver. It runs on 12V DC andrequires a constant-voltage LED driver, which is not included.
Your existing halogen transformer is probably not one. An iron-core or electronichalogen transformer is a different device, and driving an LED globe from one is the usual cause offlicker, buzz, or a lamp that will not strike. Tell us what is behind the fitting and we willtell you whether it needs changing it is the single most common reason a low-voltage LEDretrofit disappoints.
4.7W LED globe, MR16 shape, glass,5046mm. 12V DC requires aconstant-voltage LED driver, not included. Output 390lm at 3000K or420lm at 5000K. 60 beam, CRI 80,SMD, IP20. Fully dimmable with suitable dimmers the driver must supportdimming as well. Lifespan 15,000hrs.Direct size replacement for a conventional halogen MR16. Warranty 3 years.
Supplied and supported by Lights For You.
Will it fit my existing MR16 downlights?
Yes, physically it is a direct size replacement for a conventional halogen MR16, with the same 50mm face, 46mm depth and two-pin low-voltage base. It drops into the fitting the halogen came out of. What may need changing is what is behind the fitting.
Can I use my existing halogen transformer?
Usually not, and this is where most low-voltage LED retrofits go wrong. The globe needs a 12V DC constant-voltage LED driver. An iron-core or electronic halogen transformer is a different device, and running an LED globe from one typically shows up as flicker, buzz, or a lamp that will not strike. Tell us what is behind the fitting and we will tell you whether it needs replacing.
Is the driver included?
No it is sold separately. Tell us how many globes you are running and we will size a driver for the whole circuit rather than per fitting, which is usually cheaper and always tidier.
Will the beam be the same as my halogen?
Wider. This is a 60 flood, where a halogen MR16 typically threw around 36. That is better for general lighting and for washing a surface evenly, but if you were using a narrow halogen to pick out artwork or a feature, this will spread more than you expect. Ask us if you need a tighter beam.
Why glass rather than plastic?
It dissipates heat better and it does not yellow. Plastic MR16 globes discolour with age, which shifts the light warm and dims it gradually enough that you do not notice until you replace one. Glass also simply looks right in an open or clear fitting, where a plastic lamp reads as a substitute.
Which colour should I choose?
3000K for living areas, bedrooms and display cabinets warm and the default in a home. 5000K for garages, workshops and inspection work, and it is the brighter of the two at 420 lumens against 390. Note there is no 4000K in this globe, so it is a two-way choice rather than the three most of this catalogue offers.
Can I dim it?
Yes, with suitable dimmers but on a low-voltage circuit the driver has to support dimming as well as the dimmer and the lamp. All three have to agree, and buying a dimmable globe on its own achieves nothing. Tell us how you want to control it and we will specify the whole chain.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.