Your shopping cart is empty!
The Domus PLEO-14.4 Neon Side is a side-emitting LED neon flex 14.4W per metre, CRI90, dimmable,polyurethane enclosure, in 3000, 4000 or 5000K.
It publishes 450 450 80mm identical to the top-viewlisting, and obviously not a flexible strip. Those are packaging dimensions: a coiledreel in a box. The product itself is a continuous flex of roughly 10mmsection, whose actual profile size is not published on this listing.
It publishes a voltage of 220240V and a current type of DC. Those are inconsistent. Neon flex is a 24V DC product elevenother listings in this family say exactly that. 220240V is the MAINS INPUTto the driver that feeds it, not the flex itself. Wiring 240V to a 24V flexdestroys it instantly, so this is a field worth being clear about. Specify a 24V DC driver.
A continuous, side-emitting neon flex in a polyurethane enclosure, supplied with mountingclips. Because the emitter is continuous and diffused along its whole length, it readsas a solid line rather than a row of dots which is the whole reason to chooseflex over a bare strip in a channel. Domus names its applications: ceiling and floorcoves, windows and similar architectural detail. SIDE-emitting suits a curve laid outflat on a plane, where a top-view flex would twist.
| Specification | Value |
|---|---|
| Load | 14.4W per metre |
| Light output | 320 / 370 / 346 / 330lm published 2226lm/W, impossible |
| Probable output | 13201370lm 9295lm/W restored |
| Colour rendering | CRI90 |
| Colour temperature | 3000 / 4000 / 5000K |
| Voltage | 24V DC field says 220240V |
| Dimmable | Yes |
| IP rating | IP66 siblings publish IP67 |
| Beam | 120 |
| Dimensions | 450 450 80mm a carton, not the product |
| Warranty | 3 years |
Side-emitting LED neon flex. 14.4W per metre at 24V DC. CRI90. 3000 / 4000 /5000K. Dimmable. 120 beam. IP66. Polyurethane enclosure, mounting clips included. 3-yearwarranty. ITS PUBLISHED LUMEN FIGURES CANNOT BE RIGHT 320 lm from 14.4 W is 22 lm/W, and no LED productachieves that; a poor one manages 60. Restore a dropped leading digit and the set becomes13201370 lm at 9295 lm/W, tightly clustered and credible the identical error this catalogue’s PIPE-60pendant carries. IT ALSO PUBLISHES 220240 V AND DC TOGETHER: it is a 24 V DC product, and 220240 V isthe mains input to its driver.
Supplied and supported by Lights For You.
How much light does it give?
Not what the listing says. It publishes 320, 370, 346 and 330 lumens against 14.4W which is 22 to 26 lumens per watt, and no LED product achieves that. A poor one manages 60, an ordinary one 90, and this catalogue’s own linear fittings run 76 to 100. 22 lm/W is roughly halogen territory.
So what is the real figure?
Most likely 1320 to 1370 lumens restore a dropped leading digit and the set becomes 1320/1370/1346/1330, which is 92/95/93/92 lm/W: tightly clustered and entirely credible. That is offered as reasoning rather than confirmed fact. What is certain is that the published figures are wrong. Ask us and we will get the real ones before you calculate anything from them.
Has that happened elsewhere in this catalogue?
Yes, and that is part of why the reading is convincing. The PIPE-60 linear pendant publishes 658 lumens where its own description reads 1658 the identical error, caught the identical way, by noticing the efficacy was impossible. Two instances of one error class is itself worth flagging.
Is there a cross-check?
A good one. The top-view version of this same product publishes 1123 to 1253 lumens at the same 14.4W 78 to 87 lm/W, and credible. A genuine 3.5x gap in output between two versions of one flex would be extraordinary, which points at the numbers rather than at the product.
Is it really 240V?
No it is a 24V DC product. The listing publishes a voltage of 220240V and a current type of DC together, which are inconsistent, and eleven other listings in this family say 24V. The 220240V figure is the mains input to the driver that feeds it, not the flex. Wiring 240V to a 24V flex destroys it instantly, so specify a 24V DC driver.
What are the 450 x 450 x 80mm dimensions?
A carton. They are identical to the top-view listing’s and obviously not a flexible strip those are packaging dimensions for a coiled reel in a box. The product itself is a continuous flex of roughly 10mm section, whose actual profile size is not published here.
Why choose neon flex over a strip in a channel?
Because the emitter is continuous and diffused along its whole length, so it reads as a solid line rather than a row of dots. With a bare strip in a profile you have to buy depth to blend the LEDs into a line; with flex the line arrives already made. Side-emitting suits a curve laid out flat on a plane, where a top-view flex would twist.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.