Welcome To our shop !

Cell-T90 – Tilt 90Mm Cut-Out Frame To Suit Cell Downlight Module Series

$13.6 $17
SKU: KO80391101096
Availability: in Stock

The Domus CELL-T90 is a tilt frame for the CELL downlight moduleseries, 11511550mm, inblack or white. Cutout 80mm. Read the cutout, not the name. A "T90" frame takes80mm, not 90mm.That…

Qty:

The Domus CELL-T90 is a tilt frame for the CELL downlight moduleseries, 11511550mm, inblack or white. Cutout 80mm.

Read the cutout, not the name. A “T90” frame takes80mm, not 90mm.

That matters because 90mm is the standard Australian downlight aperture, so theobvious reading of the name is that this drops into an existing ceiling. It does not a holealready cut to 90mm is too big for this frame.

Two independent sources agree: this frame’s own record says80mm, and the CELL-9-T90 downlight’s datasheet gives8085mm. Elsewhere in the same range the naming is reliable the D90 takes 90mm and the D75 takes 75mm which is exactlywhat makes this one worth flagging.

If you need tilt in an existing 90mm hole, the CELL-DT90 frame is the one it takes 90mm.

The CELL frame family, and which one you actually want
Frame Cutout Body Depth What it does
T90 (this) 80mm 115115mm 50mm Tilt, shallow
DT90 90mm 9090mm 70mm Tilt, deep standard hole
D75 / D90 75 / 90mm 9090mm 70mm Fixed, deep low glare
S1 / S2 / S3 7075mm 100mm square, or 190 / 290mm long 50mm Fixed, shallow, one to three apertures
K75 / P75 70mm 9595mm 50mm Keyhole / pinhole apertures
W90 88mm 110110mm 70mm Wall washer

Tell us the hole you have, or the effect you want, and we will pick the frame.

Tilt in a shallow void the reason this frame exists
  • 50mm deep, against 70mm for the deep DT90.
  • That is the trade-off it makes: you get a tilting aperture in a void that could nottake the deep frame a converted space, a bulkhead, a ceiling with ducting above it.
  • The price is a bigger footprint. At 115115mm this is thelargest CELL frame body, and it needs that clearance between joists or battens.
  • And a smaller hole. 80mm rather than the standard 90.
What a frame is and is not
  • A frame is not a light. The CELL module and its driver are a separatepurchase CELL-9 (9W) or CELL-13 (13W), in Trio or DALI.
  • The module is what carries the beam angle: 15, 24, 36 or60. Buying a frame plus a module is the only way to get a beam other than 60 in theCELL system.
  • The module is also what carries the five colour temperatures, including a2700K setting that almost nothing else in this catalogue offers.
  • And the IC-4 rating the CELL modules state it on their datasheets, and itis the only insulation-contact rating found anywhere in this catalogue. The frame is part ofthe assembly, so ask us and we will confirm the rating for the pairing in writing.
Allowing for the module above the frame
  • Trio modules are 56mm deep; DALI modules are 68mm.
  • So a shallow frame does not by itself make a shallow installation. 50mm offrame plus a 68mm DALI module is more depth than the 70mm deep frame with a Trio module init.
  • Tell us the void depth and the module you want and we will do that arithmeticrather than leave it to be discovered on site.
Choosing the finish

Black recedes into the aperture and reduces the apparent glare of the module behind it which is why black trims are common on anti-glare fittings. White disappears intoa white ceiling.

Match the frame to the module unless the contrast is deliberate.

Where it works
  • Shallow voids where you still need a tilting aperture.
  • New ceilings cut to 80mm.
  • Aiming light at a wall, joinery or artwork from a recessed fitting.
  • Not an existing 90mm hole use the CELL-DT90 frame.
  • Not a light the module and driver are separate.
  • Needs 115115mm clear between joists.
Specifying it

Tilt frame for the Domus CELL downlight module series.Cutout 80mm. Body 11511550mm.Black or white.

Despite the “T90” name the cutout is 80mm, not 90mm corroborated by this frame’s own record and by the CELL-9-T90 downlight’s datasheet(8085mm). For tilt in a standard 90mm hole, use the CELL-DT90frame.

The CELL module and its driver are sold separately CELL-9 or CELL-13, in15, 24, 36 or 60, Trio or DALI. Allow for the module above the frame: Trio56mm, DALI 68mm. Warranty 3 years.

Supplied and supported by Lights For You.

Questions

Will it fit a standard 90 mm downlight hole?

No and this is the most important thing on the page, because the name says otherwise. A “T90” frame takes 80mm. Two independent sources agree: this frame’s own record, and the CELL-9-T90 downlight’s datasheet at 8085mm. A hole already cut to the standard 90mm is too big for it. If you need tilt in an existing 90mm hole, the CELL-DT90 frame is the one.

Why is the naming inconsistent?

We do not know, and we are not going to rationalise it. What we can show is that it is inconsistent rather than systematically wrong: the D90 does take 90mm and the D75 does take 75mm, so the numbers are reliable elsewhere in the same range. That is exactly why the T90 is worth flagging you would have no reason to doubt it.

Why choose this over the deep DT90 frame?

Depth. This one is 50mm against the DT90’s 70mm, so it gives you a tilting aperture in a void that could not take the deep frame a converted space, a bulkhead, a ceiling with ducting above it. The price is a bigger footprint at 115 115mm, the largest CELL frame body, and a smaller hole at 80mm.

Does it come with a light?

No a frame is not a light. The CELL module and its driver are a separate purchase: CELL-9 (9W) or CELL-13 (13W), in Trio or DALI. The module is also what carries the beam angle and the five colour temperatures, so buying a frame plus a module is the only way to get a beam other than 60 in the CELL system.

How much depth do I actually need?

More than the frame’s 50mm, because the module sits above it: Trio modules are 56mm deep and DALI modules 68mm. So a shallow frame with a DALI module can end up deeper overall than a deep frame with a Trio module. Tell us the void depth and which module you want, and we will do that arithmetic rather than leave it to be found on site.

Can ceiling insulation touch it?

The CELL modules state IC-4 on their datasheets, which is the only insulation-contact rating we have found anywhere in this catalogue. But the frame is part of the assembly, so ask us and we will confirm the rating for the specific frame-and-module pairing in writing rather than have you infer it from the module alone.

How much clearance does it need between joists?

115 115mm the 80mm hole is not the only constraint, and this is the largest body in the CELL frame range. On a retrofit in particular, the existing hole tells you nothing about what is beside it.

Only logged in customers who have purchased this product may leave a review.

Shipping policy for our store

We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.

  • Fast shipping within 1-3 business days
  • Free shipping on orders over $40
  • 30 days money back guarantee
  • 24/7 online customer support
  • Secure packaging & safe delivery

Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.