Tivah in solid brass is the specification chosen for how it agesrather than how it looks new. Brass is not powder-coated it weathers, developing apatina that shifts from bright gold through warm brown toward deep antique over yearsof exposure. If a uniform factory finish is the requirement, this is the wrong fitting;if you want the lighting to settle into a garden or heritage facade the way coppergutters do, it is the right one. Solid brass body, matching backing plate, high-outputreflector, IP65.

The choice to make: which part number

• HV1055T 240V AC, GU10, 60 beam. Straight to mains, nodriver. Takes a wattage-selectable globe for tuning output at install.
• HV1057GU10T 240V AC, GU10, 120 beam. Same wiring, wider spread.
• HV1057MR16T 12V DC, MR16, 120 beam.Requires a 12V DC driver; never connect it directly to 240V.

Where it works

• Heritage and period homes brass suits masonry and timber where painted alloy looks modern.
• Established gardens the patina reads as part of the planting rather than hardware.
• Coastal sites brass weathers rather than blisters, though patina will develop faster.

Specifying it

Tri-colour globes at 3000K, 4000K or 5500K warmer settings tend to suit brass,since 5500K against a golden body can look mismatched. Commit to one across the run.Expect the finish to change: fittings installed at different times will not match untilthe newer ones catch up, so do a facade in one go.

For the 12V model, size the driver to the whole circuit’s load, keep the fittingwithin 25m of the driver and the supply within5% outside those limits Havit’s warranty does not apply.Licensed electrician only.

Supplied and supported by Lights For You we can advise on brass finishes and how they weather.

Questions

Will the brass stay shiny?

No, and that is by design. Unlacquered solid brass patinatesoutdoors bright gold at first, then warm brown, eventually a deep antique tone. Therate depends on exposure, with coastal and humid sites moving fastest.

Can I stop it patinating or restore the original finish?

Brass polish and a lacquer will bring back and hold the brightfinish, but it becomes ongoing maintenance and lacquer eventually breaks down unevenlyoutdoors. Most people let it weather.

Which version needs a driver?

Only HV1057MR16T, the 12V DC model. Both GU10 models are 240V andwire straight to mains. The 12V model must never be connected directly to 240V.

Should I install all the fittings at the same time?

Ideally yes. Because brass patinates with exposure, a fitting addeda year later will look noticeably brighter than its neighbours until it catchesup.

Which colour temperature suits brass best?

3000K generally a warm tone complements the golden and brownrange brass moves through. 5500K is cooler than the metal itself and the mismatch isusually visible.