Your shopping cart is empty!
The Piaz is a fixed-down wall and pillar light in 304-grade stainless steel taking areplaceable GU10 globe. It is the straightforward member of the family: no adjustment, no up-light, onejob done cleanly light directed down a wall or pillar face.
Two things make it easy to live with. The body is 304 stainless rather than powder-coated aluminium,so there is no paint film to blister or chip in a poolside or weather-exposed position. And the globe is astandard GU10, so a failure means a lamp from any hardware shop rather than a replacement fitting.
It takes a GU10 globe at 5W, supplied across the tri-colour range:270lm at 3000K, 285lm at 4000K and 300lm at 5500K, on a 120beam. Do not exceed 35W in the 240V GU10 socket. It runs on 240V ACwith no driver, IP54, CRI above 80, and is not dimmable with the globe supplied.
Supplied and supported by Lights For You. On a pair of pillars, mount both fittings at the sameheight off the paving rather than the same height off the pillar cap pillars are rarely identical andthe eye reads the light line, not the brickwork.
Havits installation instructions for this fitting state that aluminium and 304 stainless steel fittings must not be installed within 5 km of any salt water environment. That is a condition on where the fitting may go, and it sits beside the IP rating rather than inside it: a fitting can be rated for direct rain and still fall outside this rule, because the issue is salt carried in the air rather than water landing on the surface. Note that 304 stainless steel is named in this restriction 316 stainless steel is not named in it. If your site is inside that zone, talk to us before you specify it Lights For You can point you at a fitting whose material Havit does not name here.
This fitting runs on 240 V AC mains and is Protection Class 1 an earth is required at the fitting. Havit’s installation sheet has the installer connect the earth conductor first, then live and neutral.
Does it need a driver?
No. It runs on 240V AC and takes a mains-voltage GU10 globe.
Is the globe replaceable?
Yes a standard GU10, available anywhere.
What is the maximum globe wattage?
35W in the 240V GU10 socket. This is a thermal limit on the fitting.
How bright is it?
270lm at 3000K, 285lm at 4000K and 300lm at 5500K from the supplied 5W lamp, on a 120 beam.
Is stainless steel worth it over powder coat?
Beside a pool, yes there is no paint film to blister, so it ages rather than failing. Near the sea, no: Havit names 304 stainless steel in a restriction against installing within 5 km of any salt water environment.
Can it be dimmed?
Not with the globe supplied. A dimmable GU10 and compatible dimmer can achieve it.
What is the warranty?
Three years, as a replacement warranty.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.