The Jasper is a 12W outdoor wall light built around a diffused face rather than an openaperture, so it reads as an even panel of light instead of a bright slot. That makes it a sensiblechoice at or near eye level, where a glass-fronted fitting would put a hotspot in a visitor’s line ofsight as they reach the door.

Even light, not a beam

The diffuser spreads the output across a wide, soft field. Practically, that means the Jasper lightsa person standing at your door better than it lights the wall behind them which is what you wantbeside an entry, and not what you want if you are after a graphic scallop down a feature wall.

Where it works

• Beside front, side and garage entry doors, at or near head height.
• Passage and side-access walls needing even light along their length.
• Covered porches and under-eave positions IP54 handles rain and splashing.
• Townhouse and apartment entries where a compact, soft-faced fitting suits the scale.

Specifying it

A 12W LED is built in no globe, no socket, nothing to replace. Tri-colour switching covers3000K, 4000K and 5500K, set once at installation. It runs on 240V AC with thedriver inside the fitting, is not dimmable, and CRI is above 80. The body is poly powdercoated aluminium, IP54, available in white and black at the same price.

Supplied and supported by Lights For You. Both finishes are produced in matched runs, so order thefittings for one elevation together if the powder coat needs to match exactly.

Coastal siting Havits condition

Havits installation instructions for this fitting state that aluminium and 304 stainless steel fittings must not be installed within 5 km of any salt water environment. That is a condition on where the fitting may go, and it sits beside the IP rating rather than inside it: a fitting can be rated for direct rain and still fall outside this rule, because the issue is salt carried in the air rather than water landing on the surface. If your site is inside that zone, talk to us before you specify it Lights For You can point you at a fitting whose material Havit does not name here.

Earthing and protection class

This fitting runs on 240 V AC mains and is Protection Class 1 an earth is required at the fitting. Havit’s installation sheet has the installer connect the earth conductor first, then live and neutral.

Questions

Does it need a driver?

No. It runs on 240V AC with the 12W driver built in.

Is there a globe to change?

No. The 12W LED is integrated, with no socket and no replaceable lamp.

Can it be dimmed?

No. This fitting is not dimmable.

Why choose a diffused face over clear glass?

The diffuser hides the LED and spreads the light, so there is no hotspot. That suits positions close to eye level, such as beside a door.

Is it suitable for an exposed wall?

IP54 covers rain and splashing, suitable for a normal external or under-eave wall. It is not rated for wash-down or driven coastal spray.

What is the warranty?

Three years, as a replacement warranty.