Welcome To our shop !

Stainless Steel Up Down Wall Light Piaz

$41.5 $83
SKU: KO80391101453
Availability: in Stock

The Piaz is Havits 304 stainless steel up-and-down wall pillar light two GU10 lampholders in one body, one throwing light up the wall and one down it. That symmetry is…

Qty:

The Piaz is Havits 304 stainless steel up-and-down wall pillar light two GU10 lampholders in one body, one throwing light up the wall and one down it. That symmetry is the point: a band of light above and below reads as a lit pier rather than a spotlit one.

What each direction actually produces

It ships with two 5W tri-colour GU10 globes, and the figures below are per direction not the total, which is double. At 3000K you get 270lm each way, at 4000K 285lm, and at 5500K 300lm, so output climbs slightly as the light gets cooler. The colour is chosen on a switch on the globe itself, which means one fitting covers warm, neutral and cool without re-ordering anything. The supplied globes are the 9-in-1 type, selectable at 3W, 5W or 7W as well.

The globes come out, and that changes the beam

These are standard GU10 lampholders, so the lamps are replaceable and the beam angle belongs to the globe, not to the housing. The globes supplied give a wide 120 spread. Havits optional GU10s are narrower at 60 a tighter, more architectural stripe so the beam can be changed later without touching the fitting. The ceiling is 35W per lampholder, and that is a thermal limit rather than a suggestion.

On dimming, Havit is specific: not dimmable with the globes supplied. The tri-colour globes are the reason, not the fitting Havit lists dimmable GU10 replacements (HV9506D at 3/5/7W and HV9509 at 5/7/9W) which make the same fitting dim on a Triac wall dimmer. There is no driver and no transformer in it; it wires straight to 240V mains.

Two conditions on where it goes and how it is kept

Havits current instructions state that aluminium and 304 stainless fittings must not be installed within 5km of any salt water environment. That is a wider exclusion than older copies of the same document carried, so it is worth reading as the live figure. Havit also now requires that 316 and 304 stainless fittings be cleaned regularly to prevent tea staining, and states plainly that warranty does not cover tea staining the brown speckling stainless develops in damp or salty air.

The rating is IP54. It handles splashing rather than sustained driven rain, so a soffit or a sheltered pier face suits it better than a fully open wall. Impact resistance is IK10, the highest in this range, behind a clear glass diffuser.

Installing it

It is Protection Class 1 and requires an earth. Wiring is parallel and the base is 46mm wide. Havit makes sealing a warranty condition: seal the cable entry and screw holes, then silicone around the base plate. Glare is UGR under 45, which is high expected for an exposed-lamp uplight, and a reason to mount it above eye height. Colour consistency is SDCM under 6 with CRI above 80.

Lights For You stocks the Piaz alongside its fixed-down and single-adjustable stablemates, and Havit backs it with a 3 years replacement warranty on items ordered after 01/01/22.

Questions

Are the lumen figures per direction or in total?

Per direction. Havit prints them as 2 270lm, 2 285lm and 2 300lm, so each of the two lampholders produces the stated figure and the fitting as a whole produces double.

Can I install this near the beach?

Havits current instructions exclude installation within 5km of any salt water environment for aluminium and 304 stainless fittings, and this is 304 stainless. For a coastal address a 316 stainless or solid brass fitting is the correct specification.

Is it dimmable?

Not with the globes supplied Havit states that explicitly. Because the lamps are replaceable GU10s, fitting a dimmable GU10 such as Havits HV9506D or HV9509 makes it dim on a Triac wall dimmer. The fitting itself does not decide this; the globe does.

Does it need a driver or transformer?

No. It runs on 240V mains with no driver and no transformer the GU10 globes take mains voltage directly.

What is the maximum globe wattage?

35W per lampholder. That is a heat limit inside an enclosed glass body, so it should not be exceeded even where a higher-wattage GU10 physically fits.

Why does the warranty mention tea staining?

Tea staining is the brown surface speckling stainless steel develops in damp or salty air. Havit requires regular cleaning of 316 and 304 stainless fittings to prevent it and excludes it from warranty cover, so it is a maintenance obligation rather than a defect.

Can I change the beam from wide to narrow?

Yes, by changing the globe. The supplied globes give 120; Havits optional GU10s give 60 for a tighter stripe up and down the wall. The housing has no beam angle of its own.

Only logged in customers who have purchased this product may leave a review.

Shipping policy for our store

We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.

  • Fast shipping within 1-3 business days
  • Free shipping on orders over $40
  • 30 days money back guarantee
  • 24/7 online customer support
  • Secure packaging & safe delivery

Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.