The Revo double adjustable is the two-headed version: one cylinder aiming up, one aiming down, eachon its own knuckle. Unlike a fixed up/down fitting, both heads move independently, so the beam going upneed not mirror the beam going down. That is the whole point of it.

Two aims, set separately

A fixed up/down fitting throws a symmetrical hourglass on the wall. The Revo double does not have to:you can wash the wall above and throw a tighter pool below, or angle both heads off the wall entirely tolight a plant above and a path beneath. The trade is that it takes longer to commission two decisionsper fitting, made on a ladder so set them before the access goes away.

Where it works

• Entry walls where the upper wash is decorative and the lower beam has to actually light a step.
• Pillars and columns, both heads angled to follow the face rather than the wall behind.
• Between a planted bed and a path, lighting each with its own head.
• Exposed and rain-hit elevations IP65 covers direct rain and hose wash-down. Near salt water, read Havits exclusion below.

Output, and how Havit quotes it

Havit specifies this fitting per head 2 9 W, giving2 810 lm at 3000K, 2 850 lm at 4000K and2 900 lm at 5500K. So the fitting draws 18 W in total anddelivers roughly 1,620 lm, 1,700 lm or 1,800 lm depending on the setting, split betweenthe head aimed up and the head aimed down. The figures published against this listing are thefittings totals, which is what you want when comparing it against a single-head model.

Specifying it

Both LEDs are built in no globes, no sockets. Tri-colour switching covers 3000K,4000K and 5500K, set at installation, and both heads share the one setting. It runs on240V AC with the driver inside the fitting, is not dimmable, and CRI is above 80.The body is powder-coated aluminium in white, IP65.

Supplied and supported by Lights For You. On a run of these along one wall, aim the first fitting,stand back and look at it from where people actually walk, then match the rest to it matching to adrawing rather than to the eye is how a row ends up subtly uneven.

Coastal siting Havits condition

Havits installation instructions for this fitting state that aluminium and 304 stainless steel fittings must not be installed within 5 km of any salt water environment. That is a condition on where the fitting may go, and it sits beside the IP rating rather than inside it: a fitting can be rated for direct rain and still fall outside this rule, because the issue is salt carried in the air rather than water landing on the surface. If your site is inside that zone, talk to us before you specify it Lights For You can point you at a fitting whose material Havit does not name here.

Earthing and protection class

This fitting runs on 240 V AC mains and is Protection Class 1 an earth is required at the fitting. Havit’s installation sheet has the installer connect the earth conductor first, then live and neutral.

Questions

Do both heads move independently?

Yes. Each cylinder sits on its own knuckle, so the up and down beams can be aimed separately.

Does it need a driver?

No. It runs on 240V AC with the driver built into the fitting.

Are the LEDs replaceable?

No. Both LEDs are integrated no sockets and no globes.

Can the two heads be set to different colour temperatures?

No. The tri-colour selector sets both heads to the same temperature.

Can it be dimmed?

No. This fitting is not dimmable.

Is it suitable for an exposed wall?

Yes. IP65 covers direct rain and hose wash-down.

What is the warranty?

Three years, as a replacement warranty.