Welcome To our shop !

Tivah Antique Brass TRI Colour Fixed Down

$100.495 $200.99
SKU: KO80391101461
Availability: in Stock

This is the expensive Tivah, and the reason is the metal. HV1195T is solid brass with an antique finish, not brass-coloured coating over aluminium, which is why it costs roughly…

Qty:

This is the expensive Tivah, and the reason is the metal. HV1195T is solid brass with an antique finish, not brass-coloured coating over aluminium, which is why it costs roughly two and a half times the aluminium version of the identical shape. What you buy with that is a fitting that has no coating to fail: brass corrodes to a stable surface rather than blistering, and it keeps going in conditions that strip powder coat.

The finish will move, and that is the point

An antique brass finish is a starting condition, not a permanent one. Outdoors it deepens, picks up darker tones in the recesses and stays brighter on the edges that get handled or rained on. Some owners polish it back; most leave it. If you want a fitting that looks identical in ten years, this is the wrong metal the powder-coated aluminium Tivah in silver or titanium holds its appearance. If you want one that looks better, this is the right one.

The three part numbers
  • HV1195T 240 V GU10 with the 9-in-1 switchable globe. Wattage and colour are set on the globe: 3 W, 5 W or 7 W giving 240560 lm at 3000K, 255595 lm at 4000K and 270630 lm at 5500K. Beam 60, and Havit lists this part number specifically as Triac dimmable.
  • HV1197GU10T 240 V, fixed 5 W tri-colour GU10, 270 / 285 / 300 lm, 120.
  • HV1197MR16T the 12 V DC MR16 version, same output and beam, requiring a 12 V DC LED driver.

The beam angle is a property of the globe rather than the housing, so it is changeable later within Havit’s limits of 35 W on 240 V GU10 and 20 W on 12 V MR16.

Where it can go, and where the aluminium ones cannot

The rating is IP65, so an open wall or pillar with nothing above it is fine. The restriction that matters on the rest of this range does not apply here: Havit’s installation sheet excludes aluminium and 304 stainless fittings from sites within 5 km of salt water, and solid brass is neither of those. That makes this along with the 316 stainless version one of the two Tivah finishes without that limitation, which is often the whole reason it gets specified.

On the 12 V variant, keep the fitting within 25 m of its driver and the supply within 5%. Wiring is parallel, CRI is above 80, and the warranty is 3 years replacement.

Earthing and protection class

This listing sells more than one supply, and the earthing requirement is not the same on both. Check which part number you are wiring before you start.

  • HV1195T, HV1197GU10T run on 240 V AC mains and are Protection Class 1 an earth is required at the fitting. Havit’s installation sheet has the installer connect the earth conductor first, then live and neutral.
  • HV1197MR16T run on 12 V DC and are Protection Class 3 no earth is required at the fitting. The isolation comes from the LED driver rather than from an earth conductor, and these part numbers must never be connected directly to 240 V.
Questions

Is this solid brass or brass-coloured?

Solid brass. Havits datasheet gives the material as solid brass with an antique brass finish there is no aluminium under it, which is why it is priced well above the coated versions.

Will it stay this colour?

No. Antique brass darkens and deepens outdoors, unevenly, faster on sheltered faces than on washed ones. Most people want that; if you do not, choose the powder-coated silver or titanium Tivah instead.

Can I use it near the sea?

Yes. Havits 5 km salt-water exclusion names aluminium and 304 stainless fittings, and this one is neither. It and the 316 stainless model are the two finishes in the range without that restriction.

Which part number is dimmable?

HV1195T, because the 9-in-1 globe supplied with it is Triac dimmable. HV1197GU10T and HV1197MR16T ship with fixed 5 W globes that are not.

What is the difference in beam?

HV1195T is 60, a defined arc down the wall. Both HV1197 variants are 120, a wider even wash. The globe sets it, so it can be changed later.

Do I need a driver?

Only for HV1197MR16T, which is 12 V DC. It needs a 12 V DC LED driver within 25 m, with the supply held to 5%. The two GU10 versions wire straight to 240 V mains.

Is the colour temperature chosen at order?

No. 3000K, 4000K and 5500K are all in the supplied globe and selected on a switch before it goes in, so one part number covers all three.

Only logged in customers who have purchased this product may leave a review.

Shipping policy for our store

We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.

  • Fast shipping within 1-3 business days
  • Free shipping on orders over $40
  • 30 days money back guarantee
  • 24/7 online customer support
  • Secure packaging & safe delivery

Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.