Fino Square is a surface-mounted step light with a flat105105mm face that stands only 23mm off the wall, so itreads as a lit square rather than a protruding fitting. The 3W LED sits behind anopal polycarbonate diffuser and spreads at 120, which is the point of the design:it washes the wall and the ground beside it evenly instead of throwing a hot spot.Available in black or white powder-coated aluminium.

The choice to make: surface-mounted, not recessed

Fino Square fixes to the face of a wall, so there is no cutout, no canister and nopatching which makes it the practical choice on rendered masonry, blockwork ora finished retaining wall where cutting a recess is expensive or impossible. In return,it is visible in daylight, so its 23mm depth and square proportion matter to thelook as much as the light does. IK08 impact rating means it tolerates the knocks alow-mounted fitting collects.

Where it works

• External stair flights and landings where each tread wall takes onefitting at ankle height.
• Rendered garden and retaining walls along a path, on an existinglow-voltage garden circuit.
• Undercroft, carpark and apartment access ways where IK08 impactresistance is worth having at knee height.
• Pool surrounds and alfresco steps under cover, where the wide120 spread lights the paving without glare into the eye.

Specifying it

Rated IP54: it handles splashing and rain-blown damp in a positionwith some shelter, and is not intended for a spot that takes standing water or directdriving rain. Tri-colour selectable, with output paired to temperature as30lm at 3000K, 33lm at 4000K and 32lm at 5500K.

It is a 12V DC fitting and requires a 12V DC LED driver;it must never be connected directly to 240V. Havit’s warrantyrequires each fitting to sit within 25m of its driver. The LED isbuilt in no globe is needed or possible. Not dimmable.Installation by a licensed electrician.

Backed by a 3-year replacement warranty.

Supplied by Lights For You if you are matching Fino Square to the round6W version elsewhere in the same garden, ask us to check the colour temperaturesline up before install.

Questions

Do I need to cut a hole in the wall?

No. Fino Square is surface-mounted, so it fixes to the wall facewith only a small penetration for the cable. That is what makes it workable on masonryand rendered walls.

Does it need a driver?

Yes a 12V DC LED driver, sized for the total load ofevery fitting on the run. Wiring it straight to 240V will destroy it and voids thewarranty.

How much light does each colour temperature give?

30lm at 3000K, 33lm at 4000K and 32lm at 5500K.The differences are small; choose on the look you want, not on output.

Can it go somewhere fully exposed to rain?

IP54 is a splash rating, so choose a position with some shelter. Awall in the open taking driving rain calls for an IP65 or IP67 fitting.

Is there a globe to replace later?

No. The 3W LED is built in and sealed, so there is nothing tobuy separately and nothing to change during its life.

How far from the driver can it be?

Up to 25m. Past that the voltage drop is enough to affectbrightness and the installation sits outside Havit’s warranty conditions.