Welcome To our shop !

Taso LED Step Light TRI Colour in Black

$68.995 $137.99
SKU: KO80391101299
Availability: in Stock

This is the bright end of the Taso range. The same surface-mounted aluminium body is offered at3.5W and at 10W, and this is the 10W version 600lm to 650lm depending…

Qty:

This is the bright end of the Taso range. The same surface-mounted aluminium body is offered at3.5W and at 10W, and this is the 10W version 600lm to 650lm depending onthe colour temperature selected, which is roughly three times what the smaller Taso produces and enoughto light a wide tread or a landing rather than only mark its edge.

Choosing the output before the finish

Because both Taso sizes share a body and a mounting, the decision people get wrong is output ratherthan appearance. At 10W this fitting will light the ground in front of it properly, which is whatyou want on a wide flight, a landing or a path junction where someone has to see where to put a foot. Ona narrow domestic riser it is more light than the job needs, and at ankle height surplus output becomesglare rather than useful illumination that is where the 3.5W Taso belongs. Three finishes areoffered at the same price: poly powder coated black, white, and silver.

Wiring it

All three order codes are 12V DC and require a 12V DC LED driver sized forthe whole run. At 10W each, the arithmetic gets real quickly six fittings draw 60W, sochoose a driver comfortably above that rather than level with it, and give it a position that suits itsown IP rating: a cavity, meter box or weatherproof enclosure, not buried and not exposed. The sheet warnsin capitals against connecting the fitting directly to 240V. Wiring is parallel,the cable tail is 200mm, and on a longer run it is worth feeding from near the middle rather thanone end so the last fitting does not dim from voltage drop more noticeable at this wattage than at lowoutputs, because the current drawn is higher.

Where it works
  • Wide external flights and landings, where the tread needs lighting rather than outlining.
  • Path junctions and level changes that people approach at speed.
  • Covered entries and under eaves IP54 covers rain and splashing, not hosing.
Specifying it

The 10W LED is built in no globe and no socket. Tri-colour switching across 3000K,4000K and 5500K gives 600lm, 625lm and 650lm, set once at installation andnot adjustable afterwards. It is not dimmable, so if this proves brighter than the spacewants, the answer is the 3.5W model rather than a dimmer. IP54, CRI above 80, aluminium.

Available from Lights For You in all three finishes. Worth deciding output and colour temperaturebefore the fittings arrive both are fixed once they are on the wall.

Coastal siting Havits condition

Havits installation instructions for this fitting state that aluminium and 304 stainless steel fittings must not be installed within 5 km of any salt water environment. That is a condition on where the fitting may go, and it sits beside the IP rating rather than inside it: a fitting can be rated for direct rain and still fall outside this rule, because the issue is salt carried in the air rather than water landing on the surface. If your site is inside that zone, talk to us before you specify it Lights For You can point you at a fitting whose material Havit does not name here.

Earthing and protection class

This fitting runs on 12 V DC and is Protection Class 3 no earth is required at the fitting. The isolation comes from the LED driver rather than from an earth conductor, and the fitting must never be connected directly to 240 V.

Questions

How does this differ from the 3.5W Taso?

Same body and mounting, much more light: 600650lm here against roughly 180190lm. Choose this for wide treads and landings, the smaller one for narrow domestic risers.

Can it be wired without a driver?

No. All three order codes are 12V DC and need a 12V DC LED driver. The sheet warns against connecting the fitting directly to 240V.

How big a driver do I need?

Size it on total load with headroom at 10W each, six fittings draw 60W. Position it to suit its own IP rating, not buried and not exposed.

Is there a globe to replace?

No. The 10W LED is built in no globe and no socket.

Can it be dimmed?

No. If it is brighter than the space needs, the answer is the 3.5W Taso rather than a dimmer.

Which finishes are available?

Poly powder coated black, white and silver, all three at the same price.

What is the warranty?

Three years, as a replacement warranty.

Only logged in customers who have purchased this product may leave a review.

Shipping policy for our store

We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.

  • Fast shipping within 1-3 business days
  • Free shipping on orders over $40
  • 30 days money back guarantee
  • 24/7 online customer support
  • Secure packaging & safe delivery

Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.