Welcome To our shop !

Maxi 900 316 Stainless Steel TRI

$149 $323
SKU: KO80391101498
Availability: in Stock

This is the Maxi 900 in bare 316 stainless steel the same 900 mm surface-mountedbollard and the same frosted diffuser as the black version, with the metal left visible. It…

Qty:

This is the Maxi 900 in bare 316 stainless steel the same 900 mm surface-mountedbollard and the same frosted diffuser as the black version, with the metal left visible. It is sold atone price in two electrical versions, and you choose between them by part number.

Bare 316 stainless is a commitment, and Havit says so on the product page

316 is the most corrosion-resistant metal in this range, and that is exactly why the finish is leftbare. Havit’s own advice for this SKU is to maintain it every six months, or more frequently incoastal environments, to preserve appearance and warranty, and it recommends itsHV9971 maintenance kit for the job. The reason is tea staining thebrown surface bloom stainless develops when airborne salts and grime are left on it and Havit isexplicit that tea staining is not covered by warranty. None of that makes the fittingfragile; it makes it a fitting with a cleaning schedule. If nobody is going to clean it, the poly powdercoated black version of the same bollard is the easier choice.

240 V or 12 V, and the two conditions attached to the 12 V

HV1608T-SS316-240V is 240 V AC, takes a 9 W E27globe, gives 700 lm / 720 lm / 740 lm, is Protection Class 1 andrequires an earth. HV1608T-SS316-12V is 12 V DC offa suitable 12 V DC LED driver, takes a 5 W MR16 globe, gives270 lm / 285 lm / 300 lm, and is Class 3 with no earth. On the 12 Vversion two Havit warranty conditions travel with the supply: voltage at the fitting within5%, and no more than 25 m between fitting and LED driver. Multiplefittings on one driver are wired in parallel. Havit’s HV9507 andHV9508 tri-colour MR16 drivers are the ones it lists for this range.

The globe sets the light, and there is a ceiling on it

Colour temperature is tri-colour 3000K, 4000K or 5500K, selected on a switch onthe side of the globe once the cover is twisted off anti-clockwise; it ships on 3000K. The globessupplied are 120, and a replacement globe sets its own beam. Havit caps the fitting at amaximum globe wattage of 15 W, LED globes only, which leaves headroom above thesupplied lamp and none at all for a halogen. It is not dimmable with the globes supplied.Lamp expectancy is >30,000hrs and CRI is >80.

Mounting

900 mm tall, 102 mm, on a 98 mm base plate withfour 6 mm fixing holes and a 16 mm cable entry. Surface mounted ontoconcrete or a concrete pad, never below finished ground level; every hole siliconed and silicone runaround the fitting at ground level, which Havit makes a warranty condition rather than arecommendation. All o-rings and seals must be in place. HV1607 is the optional spike.It is IP54 and IK08. Lights For You publishes these figures forHV1608T-SS316 from the HV1608 APR24 data sheet, Havit’s 12 V and 240 V installation instructions andthe supplier’s own maintenance advice for the bare stainless finish, with Havit’s3 Years Replacement warranty on items ordered after 01/01/22.

Questions

How much maintenance does the bare stainless really need?

Havit’s own page for this SKU says every six months, and more frequently in coastal environments, using its HV9971 maintenance kit. It is a wash and a wipe, not a restoration. Skipping it does not make the fitting fail, but it lets tea staining develop, and Havit states plainly that tea staining is not covered by warranty.

Should I choose this or the black one?

They are the same bollard, the same output and the same price. Take bare 316 stainless if you want the metal visible and you will keep to the cleaning schedule. Take poly powder coated black if you would rather it disappear into planting, or if nobody is going to maintain it.

Which version needs an earth?

The 240 V AC version it is Protection Class 1, and Havit’s wiring order is earth first, then live and neutral. The 12 V DC version is Class 3 and needs no earth, but must not be connected directly to 240 V.

Can I put several of these on one driver?

Yes, on the 12 V DC version. Wire them in parallel, size the driver for the total load, and keep each fitting within 25 m of it with the voltage at the fitting inside 5%. Both are Havit warranty conditions rather than guidance.

What replacement globe should I buy?

A 9 W E27 for the 240 V version or a 5 W MR16 for the 12 V, up to Havit’s ceiling of 15 W, LED globes only. Check the beam angle of whatever you buy the supplied globes are 120, and the replacement decides the spread, not the fitting.

Is it dimmable?

Not with the globes supplied. Havit records it as No not with supplied globes, which points at the lamp rather than the fitting, so we will not promise that a dimmable globe would change the answer.

How tall is it and what does it bolt to?

900 mm tall and 102 mm, on a 98 mm base plate with four 6 mm fixing holes and a 16 mm cable entry. It must be fixed to concrete or a concrete pad and must not sit below finished ground level. If you would rather spike it into soil, Havit’s HV1607 is the accessory for that.

Only logged in customers who have purchased this product may leave a review.

Shipping policy for our store

We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.

  • Fast shipping within 1-3 business days
  • Free shipping on orders over $40
  • 30 days money back guarantee
  • 24/7 online customer support
  • Secure packaging & safe delivery

Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.