Your shopping cart is empty!
Tivah single adjustable wall pillar light in titanium aluminiumThis is the single-head Tivah, in a titanium aluminium finish one adjustable head rather than the up/down pair. It is built to…
This is the single-head Tivah, in a titanium aluminium finish one adjustable head rather than the up/down pair. It is built to the same standard, which shows in the ratings: IP65 against dust and jetted water, and IK10 for impact the highest impact classification in the range, which matters on a driveway pier or a gate post where the fitting is at bumper height.
A single adjustable head is the choice where light is wanted in one direction only: down a wall from above a door, up a pier, or onto a specific target. An up/down fitting on a low pier throws light into the eyeline of anyone approaching, and on a boundary it lights the neighbour as much as you. One aimed head avoids both.
What makes this listing worth reading carefully is that it carries three genuinely different fittings, not three colours of the same one.
HV1285T is the 9-in-1 version: it takes a GU10 globe switchable between 3W, 5W and 7W as well as between three colour temperatures, so a single fitting covers nine combinations. Set it once at installation to suit the wall.
HV1277GU10T takes a fixed 5W GU10 globe and runs on 240V AC mains. HV1277MR16T takes a 5W MR16 globe and runs on 12V DC it requires a 12V DC LED driver, which is not part of the fitting.
The electrical difference between them is the part to get right. The GU10 versions are Class 1 and require an earth connection. The MR16 version is Class 3 low voltage and requires no earth at the fitting, but does require that driver. Ordering the wrong one means either a fitting that cannot be connected or a driver nobody budgeted for.
Because the 9-in-1 version is switchable, its output is quoted as a range: between 240lm and 560lm at 3000K, 255lm to 595lm at 4000K, and 270lm to 640lm at 5500K, depending on the wattage selected. The fixed 5W versions sit within that range at 270lm, 285lm and 300lm.
Colour rendering is above 80 CRI. Havit lists the fitting as not dimmable with the globes supplied, so it should not be specified on a dimmed circuit expecting the supplied lamps to respond.
GU10 and MR16 are both standard replaceable bases rather than sealed modules, which is the practical argument for this fitting over an integrated LED one. The housing is the durable, expensive part; the globe is the consumable. On an exterior fitting expected to last a decade, being able to re-lamp rather than replace is worth more than a slightly slimmer body.
Rated lamp expectancy is >30,000 hrs. Installation is work for a licensed electrician.
What does 9-in-1 mean?
The HV1285T version takes a globe switchable across 3W, 5W and 7W and across three colour temperatures nine combinations from one fitting, set at installation.
Which version needs a driver?
HV1277MR16T, the 12V version. It requires a 12V DC LED driver, which is not supplied.
Which versions need an earth?
The GU10 versions are Class 1 and require an earth. The MR16 version is Class 3 and does not.
Can it be dimmed?
Not with the globes supplied.
How tough is it?
IP65 for dust and jetted water, and IK10 for impact the highest impact rating in the range.
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.