Pinta is a recessed step light with an eyelid a small hood over the aperture that blocks the direct view of the source, so you see the lit tread and not the fitting. On a flight of stairs, that is the difference between guidance and glare.

Four versions, one aperture

• HV2921 G9 base up to 25W, lamp not included.
• HV2922 G4 base up to 20W, lamp not included.
• HV2923T 240V with a built-in tri-colour LED.
• HV2924T 12V DC with a built-in tri-colour LED; requires a driver.

Specifying it

Choose a lamp-base version when you want to swap globes later, or a built-in LED version for a sealed, maintenance-free fitting. The tri-colour models select 3000K, 4000K or 5500K at install and produce 160180lm. IP65 rated in a black powder-coated aluminium body, CRI above 80.

Note the 3-year replacement warranty. The 240V versions require an earth; the 12V version does not. Install by a licensed electrician.

Supplied by Lights For You ask us which Pinta version suits your wiring.

Coastal siting Havits condition

Havits installation instructions for this fitting state that aluminium and 304 stainless steel fittings must not be installed within 5 km of any salt water environment. That is a condition on where the fitting may go, and it sits beside the IP rating rather than inside it: a fitting can be rated for direct rain and still fall outside this rule, because the issue is salt carried in the air rather than water landing on the surface. If your site is inside that zone, talk to us before you specify it Lights For You can point you at a fitting whose material Havit does not name here.

Common questions

What does the eyelid do?

It hoods the aperture so you see the lit tread instead of the light source the difference between guidance and glare on a stairway.

Which version should I choose?

HV2921 (G9) or HV2922 (G4) if you want to swap globes later; HV2923T (240V) or HV2924T (12V) for a sealed built-in LED.

Is a globe included?

Not on HV2921 or HV2922 those take a G9 (25W max) or G4 (20W max) lamp separately. The T models have a built-in LED.

Do I need a driver?

Only for HV2924T, which runs on 12V DC. The 240V versions wire straight to mains and require an earth.

What is the warranty?

3 years replacement.

What light output do the LED versions give?

160lm at 3000K, 170lm at 4000K and 180lm at 5500K.