18w LED Pendant Light Dali Dimmable in Black or White

An outdoor pendant hangs from a soffit, a verandah ceiling or a covered entry, and lights the space below it the way an indoor pendant does – but built to survive being outside.

That construction is the whole difference. An indoor pendant used under a verandah will corrode, because it is exposed to moving damp air even where rain never reaches it. Coastal sites are harder again: salt carries a long way inland on wind, and it attacks fittings that are never actually rained on.

Hang it high enough to clear the tallest person who will walk beneath it, and remember that a pendant in a covered entry is seen from outside as well as from under it.

Light output and colour

It draws 18W.

The colour temperature is 3000K, 4000K, 5500K.

Colour rendering is RA>90 CRI, which describes how faithfully colours appear under the light. It matters most where the light falls on planting, timber, brick or stone, all of which look flat under a poor-rendering source.

The beam spread is 120.

Where it can be installed

At IP20 this fitting has no weather protection and is for dry interior positions only.

It is made from aluminium.

Powering and installing it

This is a 240V fitting, wired directly to mains.

Mains connection is licensed electrical work in Australia and has to be done by an electrician.

Plan the cable route before anything is fixed. It is the part of an installation that cannot be changed afterwards without undoing the rest of it, and it is the reason otherwise finished jobs get left half done.

Rated life is >30,000 hrs.

Before you order

Two checks save most of the problems that show up after an installation is finished. The first is where the fitting will actually be seen from: a light chosen for how it looks in a product photograph is being judged from a viewpoint nobody will ever stand in, and the same fitting can be discreet from the house and glaring from the street.

The second is what else is going in around it. A single fitting is rarely the whole scheme, and matching colour temperature and finish across everything in a space matters more to the result than the specification of any one item in it. Mixed colour temperatures in particular read as a fault rather than as a choice.

If you are unsure whether this suits what you are lighting, our team at Lights For You will talk it through against the actual space rather than the specification sheet.

Specifying and pricing this

This is part of the Havit Commercial range, which is priced on application rather than listed. Use the enquiry button on this page and we will come back with pricing for the quantity you need.

Commercial fittings are usually specified in quantity against a lighting plan, where the count, the colour temperature and the control method all have to agree across the job. We can check a schedule against what is actually available before it is issued.

Confirm availability before a specification is issued. Commercial ranges change, and a product written into a drawing that is no longer stocked is a change order later, when it is far more expensive to fix.

Frequently asked questions

How much power does it use?

18W. Add up every fitting on the run before sizing a driver or transformer.

Can it go outside?

No. At IP20 it has no weather protection and is for dry interior positions only.

Do I need an electrician?

Yes. Connecting a fitting to mains is licensed electrical work in Australia.

Why is there no price shown?

The Havit Commercial range is priced on application. Send an enquiry from this page with the quantity you need and we will come back with pricing.

How do I get pricing?

Send an enquiry from this page with the part number and the quantity. Pricing on this range depends on the job, so it is quoted rather than listed.

What warranty does it carry?

5 Years*