Lisse is a slim rectangular up/down wall light 115mm longand 28mm deep, with tempered glass at each end. This is the12V DC version, intended for low-voltage garden and facade circuitswhere a transformer already feeds a run of fittings. Its narrow body suits tightpositions where a round fitting would look oversized: pier faces, narrow entry returnsand steps up to a door.

The decision that matters: this is a 12V fitting

Lisse 12V requires a 12V DC LED driver and mustnever be connected directly to 240V doing so destroys the fittingimmediately and voids the warranty. If you do not already have a low-voltage circuit,the 240V version of Lisse is the simpler specification; this one earns its place whenseveral fittings share one transformer.

Where it works

• Garden and path walls on an existing 12V run.
• Facade detailing the slim profile disappears against the wall.
• Entry returns and step walls where depth is limited to ~28mm.

Specifying it

Tri-colour selectable at install, in black or white powder-coated aluminium, ratedIP54 suited to walls with some weather protection such as under an eave or arecessed entry, rather than fully exposed positions in driving rain. Size the driverfor the total wattage of every fitting on the circuit, keep eachfitting within 25m of the driver, and hold the supply within5%. Installation by a licensed electrician.

Supplied by Lights For You talk to us about matching drivers for a low-voltage run.

Questions

Can I wire this straight to 240V mains?

No. This is a 12V DC fitting and needs a 12V DC LED driver.Connecting it directly to 240V will destroy it and is not covered by warranty. If youwant a mains fitting, choose the 240V version of Lisse instead.

What size driver do I need?

Size it for the combined wattage of every fitting on that circuitwith headroom to spare, not for a single light. A driver run at its absolute limitshortens its own life and the fittings’.

Is IP54 enough for outdoors?

IP54 handles splashing water and is fine under an eave, in arecessed entry or on a sheltered wall. For a wall taking direct driving rain orcoastal spray, choose an IP65 fitting.

Does it need a globe?

No. The LEDs are built in and not user-replaceable, so there isnothing to buy or change. When the fitting reaches end of life the whole unit isreplaced.

How far apart should they be spaced?

On a facade, even spacing matters more than a specific distance the twin up/down beams create a repeating pattern, and uneven gaps read as a mistakeonce it is dark. Set out the positions on the wall before drilling.