Your shopping cart is empty!
Flexible neon is LED strip built inside a solid silicone body. Where a bare strip shows a row of separate points, the silicone diffuses them into one continuous line – the look that gives it its name, without gas, glass or the fragility that came with it.
It bends along its length, which is what makes it useful for curves, coves, signage and edges that a rigid channel cannot follow. It is also far more robust than a bare strip: the silicone is the diffuser and the protection at once.
This strip draws 9.6W per metre, producing 405lm per metre.
Both figures are per metre, not per reel. A long run multiplies them, and that is the number that decides the driver.
Colour rendering is >80 CRI, which describes how faithfully colours appear under the light. It matters most where the lighting falls on food, skin, timber or fabric.
The beam spread is 120.
At IP67 this is rated for wet or exposed positions – outdoors, in bathrooms, or anywhere it will be splashed or rained on.
The rating protects the strip itself. The cut ends and the joints are the vulnerable part of any run, so they have to be sealed properly if the protection is to mean anything in practice.
This strip runs at 24V DC, so it needs an LED driver between it and the mains. It cannot be connected to mains directly.
Size the driver from the run, not the reel: multiply the wattage per metre by the metres you are actually installing, then choose a driver comfortably above that total. A supply working at its limit runs hot, and heat shortens both the driver and the strip.
The driver’s output voltage has to match the strip. Connecting 24V strip to the wrong supply either leaves it dark or destroys it, and that is not a warranty claim.
Strip is cut to length at the marked cutting points only. Cutting between them severs the circuit and kills everything past the cut, so plan the run to the nearest marked point rather than to the exact millimetre.
Neon bends in one plane only – along its face, not edgewise. Forcing it the other way damages the circuit inside the silicone, and the damage is not visible from outside until the section fails.
Test the run before committing it. Adhesive backing does not survive being lifted and re-laid well, and a fault found after the diffuser and end caps are on means taking the whole run apart.
Does it come with a driver?
No. The strip is supplied on its own and needs a 24V DC driver sized to your run.
Is the wattage per metre or per reel?
Per metre. 9.6W is what one metre draws, so multiply by the length of your run before sizing a driver.
Can I cut it to length?
Yes, but only at the marked cutting points. Cutting between them kills the section past the cut.
Can it go outside?
Yes – it is rated IP67. Seal the cut ends and joints properly, as those are the vulnerable points on any run.
Do I need an electrician?
For the mains connection to the driver, yes. That is licensed electrical work in Australia.
What warranty does it carry?
3 Years*
Only logged in customers who have purchased this product may leave a review.
We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.
Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.