Welcome To our shop !

90Cm Downrod & Wiring Loom For Fresco Ceiling Fan

$30.5 $61
SKU: KO80391101135
Availability: in Stock

This is a 900mm downrod and wiring loom for the DomusFresco ceiling fan, with a 190mm canopy, inblack or white. Confirm the fan model and your ceiling height with us…

Qty:

This is a 900mm downrod and wiring loom for the DomusFresco ceiling fan, with a 190mm canopy, inblack or white.

Confirm the fan model and your ceiling height with us beforeordering. A downrod is a structural part it holds a spinning fan above people andthere is no datasheet for it.

What we can tell you: it is 900mm long, includes thewiring loom, has a 190mm canopy, and is for theFresco fan. Warranty one year.

What no source records: the rod diameter, themaximum fan weight it is rated for, the coupling type, and whether the mounting hardwareis included. Its record also holds a length of 900mm and a height of 90mm a factor of ten apart, and only one of them describes the rod.

Send us your fan’s model number and the ceiling height and we will confirm the correct rodlength and the fit with Domus.

There are two 900mm downrods in this range, for different fans
Part For
CFA-DR2 (this) Fresco
CFA-DR1 Axis, Hover and Motion

Downrods are rarely interchangeable between ranges, because the coupling, the roddiameter and the loom connectors are all specific to the fan. Order by the fan, not by thelength.

Why the rod length is a performance decision, not just a spacer
  • A ceiling fan needs air above it as well as below. Mounted too close to the ceiling itrecirculates the same air and moves noticeably less of it.
  • 900mm is a long rod, and it belongs on a high or raked ceiling a void, a cathedral ceiling, or a flat ceiling of roughly 3metres and above.
  • On a standard 2.4m ceiling a 900mm rod would put the blades at roughly1.6m, which is head height. Do not fit this rod on a standard ceiling.
  • Tell us the ceiling height and we will work back to the right rod length rather thanhave you order the longest one available.
The wiring loom is part of the package
  • A longer rod needs a longer loom, made to length with the correct connectors at eachend which is why this is sold as a pair rather than as a bare tube.
  • Do not extend a fan’s wiring by splicing. A joined cable inside a rotating assemblyis not a repair worth making.
  • Order the rod and loom together as this part rather than sourcing a rodseparately.
A structural fixing as well as an electrical one
  • A ceiling fan is a fixed appliance on a 240V circuit and a load hanging from thebuilding’s structure at the same time.
  • On a long rod the loads at the fixing point are higher, because any wobble actsthrough a longer lever. The fixing has to be into structure, not into plasterboard.
  • On a raked ceiling you may also need a sloped-ceiling kit a standard canopyonly takes a few degrees of pitch before the rod binds. Tell us the pitch as well as theheight.
  • Ask us for the installation instructions with the quote so your electrician seesthem before the visit.
Where it works
  • High flat ceilings roughly 3m and above with a Fresco fan.
  • Raked and cathedral ceilings, where the fan must drop into the room.
  • Voids and double-height spaces.
  • Not a standard 2.4m ceiling it would put the blades at head height.
  • Not for Axis, Hover or Motion fans that is the CFA-DR1.
  • Not a DIY job licensed electrician, fixed into structure.
Specifying it

900mm downrod with wiring loom for the Domus Fresco ceiling fan.190mm canopy. Black or white. Warranty 1 year.

No datasheet exists for this part. The rod diameter, themaximum fan weight, the coupling type and the included hardware areall unrecorded, and we are not publishing figures we cannot stand behind on a structuralpart. Its record holds a length of 900mm and a height of 90mm; only one describesthe rod. A companion part, the CFA-DR1, serves the Axis, Hover and Motion fans order by the fan, not the length.

Send us your fan’s model number and your ceiling height and we will confirm the correct rodlength and the fit with Domus before you order. Installation by a licensedelectrician.

Supplied and supported by Lights For You.

Questions

Will it fit my fan?

Only if it is a Fresco. There are two 900mm downrods in this range this CFA-DR2 for the Fresco, and the CFA-DR1 for the Axis, Hover and Motion fans. Downrods are rarely interchangeable between ranges because the coupling, the rod diameter and the loom connectors are all specific to the fan. Send us the model number from the motor housing and we will confirm before it ships.

Is 900 mm right for my ceiling?

Only on a high one. A 900mm rod belongs on a ceiling of roughly 3 metres or more, or on a raked or cathedral ceiling where the fan has to drop into the room. On a standard 2.4m ceiling it would put the blades at around 1.6m, which is head height. Tell us the ceiling height and we will work back to the right length.

Why not mount the fan close to the ceiling?

Because a fan needs air above it as well as below. Mounted too close it recirculates the same air and moves noticeably less of it so a fan on a high ceiling with no rod both performs worse and sits too far from the people it is meant to cool. The rod is a performance part, not just a spacer.

Does it include the wiring?

Yes the wiring loom is included, made to the rod length with the correct connectors at each end, which is why it is sold as a pair rather than as a bare tube. Do not extend a fan’s wiring by splicing: a joined cable inside a rotating assembly is not a repair worth making.

What weight of fan is it rated for?

Not recorded in any source we hold, and we will not estimate it on a structural part. Ask us and we will get it from Domus your electrician will want it too, particularly on a long rod where any wobble acts through a longer lever and the loads at the fixing point are higher.

My ceiling is raked is the rod enough?

Possibly not on its own. A standard canopy only takes a few degrees of pitch before the downrod binds against its edge, so a raked ceiling usually needs a sloped-ceiling kit as well. Tell us the pitch as well as the height and we will work out what the installation needs.

Can I fit it myself?

No. A ceiling fan is a fixed appliance on a 240V circuit and a load hanging from the building’s structure at the same time, and on a long rod the fixing has to be into structure rather than plasterboard. Ask us for the installation instructions with the quote so your electrician sees them before the visit.

Only logged in customers who have purchased this product may leave a review.

Shipping policy for our store

We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.

  • Fast shipping within 1-3 business days
  • Free shipping on orders over $40
  • 30 days money back guarantee
  • 24/7 online customer support
  • Secure packaging & safe delivery

Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.