A 90mm 12W LED downlight in the standard Australian cut-out this is the higher-output member of the HV5530T family, for rooms where a 7W fitting leaves the corners dim. Fixed beam, tri-colour switchable, white or black.

When to choose 12W

Output should follow ceiling height and room use rather than habit. At 12W this suits kitchens, open-plan living and higher ceilings, or lets you space fittings further apart for the same light level fewer holes in the ceiling and fewer fittings to buy. For bedrooms and hallways a lower wattage from the same family is usually the better call.

Specifying it

• 90mm cut-out the standard aperture, so it drops into most existing downlight positions.
• Tri-colour 3000K, 4000K or 5500K selected at install.
• Dimmable check your dimmer is LED-compatible; an old leading-edge dimmer may buzz or flicker.

Available in white or black. 3-year replacement warranty. Install by a licensed electrician.

Supplied by Lights For You tell us your ceiling layout and we will work out the spacing.

Coastal siting Havits condition

Havits installation instructions for this fitting state that aluminium and 304 stainless steel fittings must not be installed within 5 km of any salt water environment. That is a condition on where the fitting may go, and it sits beside the IP rating rather than inside it: a fitting can be rated for direct rain and still fall outside this rule, because the issue is salt carried in the air rather than water landing on the surface. If your site is inside that zone, talk to us before you specify it Lights For You can point you at a fitting whose material Havit does not name here.

Earthing and protection class

This fitting runs on 240 V AC mains and is Protection Class 2 it is double insulated, so no earth is required at the fitting.

Common questions

What size hole do I need?

90mm the standard Australian downlight aperture, so it drops into most existing positions.

When should I choose 12W over a lower wattage?

For kitchens, open-plan living and higher ceilings, or to space fittings further apart for the same light level.

Is it dimmable?

Yes. Check your dimmer is LED-compatible an older leading-edge dimmer may buzz or flicker.

Do I need a driver?

No separate driver to specify. It wires to mains.

Can I aim the beam?

No, it is a fixed downlight. The beam points straight down, which is what gives even coverage across a ceiling grid.

What colour temperature does it give?

Tri-colour switchable: 3000K, 4000K or 5500K, selected at installation.