Welcome To our shop !

Deco-Adap – 140Mm Adapter Plate To Suit Deco-13 Round

$15.192 $18.99
SKU: KO80391101098
Availability: in Stock

The Domus DECO-ADAP is a 140mm adaptor plate that lets aDECO-13 round downlight be installed in a cutout of110130mm. 27mm deep, inblack or white. This is the part that saves…

Qty:

The Domus DECO-ADAP is a 140mm adaptor plate that lets aDECO-13 round downlight be installed in a cutout of110130mm. 27mm deep, inblack or white.

This is the part that saves a ceiling someone has already cut toobig. A DECO-13 needs a 90mm hole (or95mm for the tilt version). If the existing hole is anywhere between110mm and 130mm because an older, larger downlightcame out of it, or because a hole saw wandered this plate covers the gap and takes the fitting.

140mm across, 27mm deep. That cutout range is on thedatasheet and in no product field, so it will not appear in any specification pulled from ourrecord. Measure your hole and tell us the number if it is outside110130mm this is the wrong part and we will say so.

The DECO-13 downlight is sold separately. This is the plate only.

When you need one
  • Replacing old, large-aperture downlights 50W halogen fittings andolder LED units often sat in holes far larger than a modern 90mm.
  • Repairing a cutting mistake without patching and repainting a ceiling.
  • Standardising a mixed ceiling where a room has been re-lamped in stages andthe holes are not all the same size.
  • It is visible. At 140mm the plate is wider than the fitting, so a runof them alongside plain DECO-13s will not look identical. Either use them consistently across aroom, or accept the difference.
Measuring before you order
  • Measure the hole, not the old fitting. The trim on the old downlight is usuallywider than the aperture behind it.
  • Measure across two axes. Holes cut by hand are rarely round, and the larger figure isthe one that matters.
  • Between 110 and 130mm, this is the part. Under110mm the DECO-13 may fit directly; over 130mm, tell us and we will look foranother answer.
What it does not change
  • It does not change the fitting’s performance output, colour, beam and IPrating are all the DECO-13’s.
  • It adds 27mm at the ceiling line, which sits below the plasterboard ratherthan above it, so it does not affect the void depth the fitting needs.
  • It is available in black and white to match the two DECO-13 finishes.
Ordering the pair

You need two things: the DECO-13 downlight andthis plate, in matching finishes.

Tell us how many holes, what size they are, and the finish and we will quote bothtogether that is faster than working out which of the two DECO cutouts applies to your version.

Where it works
  • Existing ceilings cut to 110130mm.
  • Halogen and older-LED replacement, without patching.
  • Mixed-hole ceilings being standardised.
  • Not for holes under 110mm or over 130mm measure first.
  • Not a light the DECO-13 is sold separately.
  • It is visibly wider than the fitting; use them consistently across a room.
Specifying it

140mm adaptor plate for the DECO-13 round LED downlight, 27mm deep.Suits an existing cutout of 110130mm that range ison the datasheet and in no product field. Black or white, to match the DECO-13 finishes. The DECO-13 downlight is sold separately. Warranty 3 years.

For reference: the DECO-13 itself takes a 90mm cutout, and its tilt versiontakes 95mm. If your ceiling is not yet cut, you do not need this plate.

Supplied and supported by Lights For You.

Questions

What hole size does it suit?

110130mm. The plate itself is 140mm across and 27mm deep, so it covers a hole in that range and takes the DECO-13 in the middle. Measure your hole across two axes holes cut by hand are rarely round and the larger figure is the one that matters. Note that range is on the datasheet and in no product field, so it will not appear in a specification pulled from our record.

Does the downlight come with it?

No this is the plate only, and the DECO-13 downlight is sold separately. Tell us how many holes, what size they are and which finish you want, and we will quote both together in matching black or white.

Why would I need one?

Because the hole in the ceiling is already bigger than the fitting needs. That usually happens when old 50W halogen downlights or older large-aperture LED units come out, or when a hole saw has wandered. The alternative is patching and repainting the ceiling, which is a far bigger job than a 140mm plate.

What cutout does the DECO-13 need on its own?

90mm for the fixed version and 95mm for the tilt version the two are not the same, which is worth knowing before anyone cuts. If your ceiling is not yet cut, you do not need this plate at all.

My hole is 135 mm will it still work?

No, and we would rather tell you than sell you a plate that does not cover. The range is 110130mm. Tell us the actual measurement and we will look for another answer there are larger-aperture fittings that may suit the hole you already have.

Will it look obvious?

Somewhat. At 140mm the plate is visibly wider than the fitting, so a run of adapted downlights beside plain DECO-13s will not look identical. Either use them consistently across a room, or accept the difference. It is still far less obvious than a patched and repainted ceiling.

Does it affect the light or the ceiling void?

Neither. Output, colour temperature, beam angle and IP rating are all the DECO-13’s and unchanged. The 27mm sits below the plasterboard rather than above it, so the void depth the fitting needs is the same as without the plate.

Only logged in customers who have purchased this product may leave a review.

Shipping policy for our store

We offer fast and reliable shipping worldwide. All orders are carefully packaged and shipped within 1–3 business days after payment confirmation.

  • Fast shipping within 1-3 business days
  • Free shipping on orders over $40
  • 30 days money back guarantee
  • 24/7 online customer support
  • Secure packaging & safe delivery

Standard shipping, expedited shipping and express delivery options are available at checkout. Delivery time depends on your destination country and local logistics.